10M USB 2.0 Certified Active A/A Gold Extension Cable
The U026-10M provides up to 150mA of power to the connected device. If your device requires more than 150mA of power, it will either need to have its own power supply; or, to be plugged into a powered USB 2.0 hub (such as Tripp Lite U222-004-R) that is connected to the U026-016.
Built in Repeater maintains Hi-Speed USB signal quality, and electrical / timing specifications
Plug and Play....Compatible with all major operating systems
Tripp Lite's 10-meter ( 33 ft. ) USB 2.0 active extension cable is a bus powered extension cable that can be used to increase the length of a device cable without the worry of signal loss and potential performance problems. USB limits a cable's length to 16ft. Any length above 16 feet requires the use of an active cable such as this one. This cable has a signal booster built in. The overall cable length can be extended up to 131ft by daisy chaining up to 4 of these active cables. The cable must be plugged directly into a USB port (either on the PC or a hub). Use a standard 6' 10' or 15' USB A-B cable to reach the desired distance. The U026-10M provides up to 150mA of power to the connected device. If your device requires more than 150mA of power, it will either need to have its own power supply; or, to be plugged into a powered USB 2.0 hub (such as U222-004-R) that is connected to the U026-10M.
10 meter ( 33 ft.) USB2.0 Active Extension Cable, USB-A Male to USB-A Female
Full 480Mbps Transfer rate, as well as backward compatible to USB 1.1 ( 12Mbps )
Daisy Chain four cables for a total of 40 Meters ( 131ft )
Bus Powered...no external power required
Compatible with all major operating systems....Plug-and- Play; no software to load