Includes hardware for easy mounting in 19-inch racks
Provides 7,000 BTU/h (2.0 kW) of cooling capacity
Saves energy with efficient close-coupled cooling
Saves valuable floor space in IT environments
Supports optional remote management via Ethernet
The SRCOOL7KRM Rack-Mounted Air Conditioning Unit pumps 7,000 BTU/h (2.0 kW) of close-coupled cooling power into your IT equipment to prevent shutdowns, malfunctions and failures caused by overheating. This space-saving, energy-efficient unit is perfect for data centers, server rooms, network closets and other environments with heat-sensitive rack-mounted equipment and limited floor space.
The self-contained SRCOOL7KRM mounts just like any other rack equipment in 8U of space at the top or bottom of a rack enclosure. A magnetic air dam attaches to the front door of the rack enclosure to ensure that equipment draws cool air from the SRCOOL7KRM instead of drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRCOOL7KRM filters the air, and its built-in evaporator eliminates condensation, as well as the need for a floor drain or water collection tank.
The 7-foot cord plugs into a standard 15-amp (NEMA 5-15R) outlet. The unit restarts automatically after power failures, and you can use the built-in timer to schedule unattended shutdown and startup. The intuitive control panel includes a digital display and diagnostic LEDs to communicate operating conditions at a glance.
The optional SRCOOLNET2 remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over the Ethernet network from any location via SNMP, Web, SSH or telnet. The SRCOOLNET2 accessory also includes an ENVIROSENSE® temperature and humidity sensor that allows you to link cooling output with temperature readings up to 12 feet away.
Certifications & Standards
Ideal for enclosures with perforated doors(not for use in enclosures with solid/plexiglass/ glass doors)
When using a bottom-mounting configuration, the enclosure's floor must be open with no tray or pan below SRCOOL7KRM
Evaporator coils can be vented through enclosure's rear perforated doors or optional SRCOOL7KDUCT(no solid doors)
In an open frame application, cooling air delivered to the equipment is lessened, since cold air escapes into the room. Condenser must be ducted using the SRCOOL7KDUCT.
SmartRack 7,000 BTU 120V Rack-Mounted Air Conditioning Unit