HomeIndexesTripp LitePDUMH20HVATNET

Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM


Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


UPC Code: 037332151506

Provantage Code:  TRP91CX

Condition:  Factory New

  • Product Type: PDU
  • Limited Warranty: 2 Year
  • PDU Type: Switched
  • Input Voltage: 230 V AC
  • Country of Origin: Taiwan
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ComputingPower AccessoriesPower Distribution Units (PDU)

Tripp Lite PDUMH20HVATNET Specifications

    Tripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM


    Rear View
    Tripp Lite's 200-240V 16A Switched, Metered PDU system with Automatic Transfer Switching (ATS) offers 8 switched C13 outlets and 2 unswitched C19 outlets, plus a digital display to indicate total connected equipment power consumption level in amps. Switched outlets are factory programmed for sequential turn-on at 250 millisecond intervals when the PDU is first energized to prevent inrush-related equipment interaction on startup. Built-in web/network monitoring card enables remote power monitoring and programmable or real-time outlet control. Remote interface displays status of input power, load capacity and outlet power status via secure network or web browser interface. Offers individual outlet control to power on, off, or cycle AC output to regain control of locked-up servers and other network devices. Programmable load ramping and shedding enables user-configurable startup and shutdown sequences, including UPS load management to automatically increase runtime for the most critical connected items by shutting down less critical items at user-determined intervals. Supports notification and logging of input power status, event notification, output power and output loading conditions. Supports 1U rackmount installation in a 2 or 4 post racks.


    Features Include
    • 200-240V 16A Switched, Metered PDU system with Automatic Transfer Switch (ATS) option
    • Two C20 inlets support connection to Primary and optional Secondary power sources
    • Built-in C20 inlets support a variety of user-supplied cordsets
    • Front panel digital ammeter displays power consumption in amps
    • Web/Network monitoring card enables remote power monitoring and control of power to each switchable C13 outlet
    • 8 built-in C13 switched outlets and 2 unswitched C19 outlets
    • ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware (ATS function requires the use of a full time sine wave online UPS on the Primary input, like Tripp Lite's SmartOnline series)
    • ATS functionality with 2-5 millisecond transfer time is supported by any two 200-240V AC power sources, regardless of phase angle, to offer support for a variety of unique redundant power applications
    • Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.8 inches
    • Also supports 0U vertical mounting in the cable managment area of many rack enclosures
    • Individually controlled outlets provide load management power control to networked equipment
    • Sequential outlet turn on eliminates power up in-rush of connected devices on initial start-up

    In the box

    • Switch, Metered PDU with ATS Support
    • User manual with warranty information

At a Glance

    • Single phase 16/20A 200-240V Auto Transfer Switch / ATS PDU
    • Enables redundant A/B power option for non-redundant network devices
    • Built-in LX Platform Network Interface
    • 1U horizontal rackmount; 10 outlets (8 C13 switched / 2 C19 unswitched)
    • Individually switched outlets, network interface and 2 digit visual current meter
    • TAA Compliant


    Tripp Lite Switched ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Switched PDU features include individually controllable output receptacles and built-in network interface. Super-fast switchover between primary and secondary power sources occurs within milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability. Built-in LX Platform network management interface card. The Java-free LX Platform HTML5-based network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.

    More from the Manufacturer


    Input Receptacles: 2 x IEC C20

    Output Receptacles:

    • 2 x IEC C19
    • 8 x IEC C13

Additional Product Images


Product NameTripp Lite PDU Switched ATS 200-240V 16/20A 8 C13 2 C19 C20 Horizontal 1URM
Product TypePDU
Receptacle TypeIEC 60320 C13

IEC 60320 C19

TAA CompliantYes
PDU TypeSwitched
Mounting OrientationVertical
Receptacle Detail8 x IEC 60320 C13

2 x IEC 60320 C19

Environmental ComplianceRestriction of Hazardous Substances (RoHS)
Rack Height1U
Mount TypeRack-mountable
Input Voltage230 V AC
Output Voltage200 V AC

208 V AC

220 V AC

230 V AC

240 V AC

Environmentally FriendlyYes
Country of OriginTaiwan
Package Contents
  • PDUMH20HVATNET PDU Switched ATS 200V - 240V 16A 10 Outlet
  • User Manual with Warranty Information
Limited Warranty2 Year
Supplies/Accessories for Tripp Lite PDUMH20HVATNET

Tripp Lite EnviroSense2 (E2) Environmental Sensor Module

Mfg Part# E2MTHDI

The Following Product is Compatible With Tripp Lite PDUMH20HVATNET

Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.

Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
© Copyright 1984-2024 Provantage
Tripp Lite Model PDUMH20HVATNET