Home Theater HDMI over Dual Cat5/Cat6 Extender Wall Plate Kit
With Tripp Lites HDMI Over Cat5/Cat6 Wallplate Extender Kit, you can locate a HDMI enabled display up to 230 ft. away from the video source, using readily available Cat5 or Cat6 UTP cable (for best performance, use Solid wire Cat6). The kit consists of a Passive wallplate at the video source side, and an Active wallplate (with built-in signal regenerator) at the display side. Simply run two Cat5/6 UTP cables between the two wallplates, and plug in standard Tripp Lite HDMI patch cables to the video source and the display. The Green LED on the Display wallplate lets you know that power and a signal are coming from a connected video source. The Red LED indicates only a signal is being received. The kit is functioning properly when the unit is connected to a display and the Green LED is lit.
Break the 5-meter HDMI barrier using Cat5/6 UTP Cable
1080p Resolution up to 115 ft.
720p Resolution up to 196 ft.
480p Resolution up to 230 ft.
For best performance, use Solid conductor Cat6 cable (Model # N222-01K-BL)
Termination Tool included for punching down UTP wire
Use Tripp Lite P568 HDMI cables from wallplates to devices
In the box
1 - HDMI Passive Wallplate (video source side)
1 - HDMI Active Wallplate with Signal Regenerator (display side)
1 - UTP Stripper/Punch Down Tool
At a Glance
Extends a 1080p (24Hz) or 1080i (60Hz) signal up to 150 ft. using 24Awg, Solid Wire Cat6* cabling (Tripp Lite N222-Series, or N224-Series )
Extends a 3D signal up to 100 ft. using 24Awg, Solid Wire Cat6 cabling
Supports 24-bit True Color (8-bits per channel)
Supports DTS-HD, Dolby True HD and 7.1 Channel Surround Sound Audio
Supports HDCP, EDID and DDC
No external power required
*When using Cat5 cable, the maximum extension distance is reduced by 50 ft.
Locate your HDMI display screen up to 230 ft. away from the HDMI source