Tripp Lite Isolator Series Dual-Voltage 115/230V 300W 60601-1 Medical-Grade
Click image to enlarge or see more views.
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
Tripp Lite Isolator Series Dual-Voltage 115/230V 300W 60601-1 Medical-Grade
Highlights
Tripp Lite Medical Grade Isolation Transformers offer full line isolation, continuous noise filtering and enhanced common mode surge suppression, making them ideal for protection of sensitive equipment in patient-care areas. Their Faraday shield provides full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.
General Information
Features Include
<100A leakage current for Isolation Transformer and all connected equipment
Circuit breaker overload protection and lighted power switch
Hospital-grade plug and outlets
All-metal housing
At a Glance
Protects sensitive equipment from EMI/RFI line noise and surges
Cumulative leakage current less than 50 µA
Automatically shuts down all outlets in case of overload
Offers complete isolation from input AC mains power
Ideal for use in any industrial, network or medical environment
Overview
The IS300HGDV Isolator® Series Dual-Voltage 115/230V 300W 50/60Hz Medical- Grade™ Transformer with full CAN/ES/IEC/EN 60601-1 listing is ideal for protecting sensitive electronic equipment in patient-care vicinities. It can be configured for either step-up voltage, step-down voltage or pass-through voltage operation. Along with line isolation and continuous EMI/RFI line noise filtering, its surge protection rating of 240 joules suppresses excess voltage to prevent it from damaging connected equipment.
An internal low-impedance isolation transformer component offers 100% isolation from the input mains AC line. Faraday shield reduces the cumulative leakage current of the IS300HGDV and connected equipment to levels less than 50 microamps, while removing utility switching transients and harmonics generated by other on-site loads and reducing the impact of utility or lightning related surge conditions.
Transformer filtering provides continuous common-mode noise rejection with no wearable parts. The IS300HGDV reduces 6000V IEEE 587 Category A and B ring wave and combination wave test surges to only 0.5V common mode.
Components connect to four C13 outlets with fuse overload protection and a lighted on/off switch. The rugged all-metal unit housing ships ready for placement in any industrial, medical, office, network or audio/video environment. Requires a C14-to-C13 AC input cord (sold separately).
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
Shop with confidence! Provantage is an authorized Tripp Lite dealer.