The sturdy KVM Extension Kit extends keyboard, video, and mouse controls for distances of up to 150m (490ft.). Eliminate the time it takes to walk to the networking room by extending KVM controls to your office. Connect the KVM Extension Kit to a TRENDnet KVM switch to control multiple servers from a remote location.
No software installation is required. Simply connect the devices with the included cables for full KVM controls. Use the convenient dials on the front of the remote console unit (receiver unit) to adjust Gain (resolution adjustment) and Equalization (contrast correction). Input hot-key commands to control local and remote console stations. The remote console unit (receiver unit) supports PS/2 Keyboard and mouse devices and monitors with a VGA port. The local console unit (transmitter unit) supports USB, PS/2, and VGA connections.
At a Glance
Extend KVM controls for distances of up to 100 m (328 ft.)
Connect to a TRENDnet KVM switch to manage multiple servers
Convenient OSD management controls
All required cables included (excluding network cable)
No CD Installation-Simply connect the transmitter and receiver for full KVM management
NDAA compliant
Overview
Extend KVM controls for distances of up to 100 m (328 ft.)
Connect to a TRENDnet KVM switch to manage multiple servers
Convenient OSD management controls
All required cables included (excluding network cable)
No CD Installation-Simply connect the transmitter and receiver for full KVM management
NDAA compliant
TRENDnet's KVM Extension Kit, model TK-EX4, extends keyboard, video, and mouse controls for distances of up to 100 m (328 ft.). No software installation required-simply connect the transmitter and receiver for full KVM controls. Eliminate the time it takes to walk to the networking room by extending KVM controls to your workstation
Package Contents: TK-EX4 Receiver Quick Installation Guide 2 sets of 1.2 m (4 ft.) 3-in-1 VGA combination cables 1 set of 1.2 m (4 ft.) USB Type A to B cable 2 Power Adapters (5 VDC, 2A) 2 USB to PS2 adapters
Waste Electrical and Electronic Equipment Directive (WEEE)
Connectivity Technology
Wired
Environmentally Friendly
Yes
Graphic Mode
WUXGA
Product Condition
New
Number of Network (RJ-45) Ports
2
Number of USB Ports
6
Number of VGA Ports
4
Transmitter Height
0.98"
Transmitter Width
5.12"
Transmitter Depth
2.56"
Receiver Height
0.98"
Receiver Width
5.12"
Receiver Depth
2.56"
Transmitter Weight (Approximate)
10.05 oz
Receiver Weight (Approximate)
10.23 oz
Country of Origin
Taiwan
Product Model
TK-EX4
Power Consumption
4.70 W
Input Voltage
110 V AC
220 V AC
Package Contents
TK-EX4 Receiver
Quick Installation Guide
2 x Sets of 1.2 m (4 ft.) 3-in-1 VGA combination cables
1 x Set of 1.2 m (4 ft.) USB Type A to B cable
2 x Power Adapters (5 VDC, 2A)
2 x USB to PS2 Adapters
Limited Warranty
2 Year
NDAA Compliant
Yes
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.