HomeIndexesMerakiMA-INJ-6

Meraki mGig 802.3BT PoE Injector (Power)

Meraki MA-INJ-6
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of Meraki products to qualify.

Manufacturer Part#  MA-INJ-6

UPC Code: 810979018254

Provantage Code:  CSC7NUK

Condition:  Factory New

  • Product Type: PoE Injector
  • Limited Warranty: 1 Year
  • Form Factor: Wall Mountable
  • TAA Compliant: No

Big DealsSatisfaction Guaranteed

Note: We Are Unable to Sell this Product to Dealers.
Provantage is authorized to only sell this product to a final purchaser or licensee that has acquired it for their own use and not for resale, remarketing or distribution.

SoftwareBusiness ApplicationsBusiness Solutions

Meraki MA-INJ-6 Specifications

    Meraki mGig 802.3BT PoE Injector (Power)


At a Glance

    • Reduces cost and simplifies installations by eliminating the need to provide separate power line
    • Increases installation flexibility by powering devices from up to 100 meters away
    • Fully IEEE 802.3bt standard compliant
    • Supports 10/100/1000BASE-T and 10 Gbps Multigigabit Ethernet
    • Power, load detection and fault diagnostics LEDs

Overview

    Increased Flexibility, Reduced Installation Time and Cost One of the main constraints when designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Meraki multigigabit PoE injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost. The Meraki Multigigabit 802.3bt PoE Injector MA-INJ-6 provides fully-compliant 802.3bt detection, with disconnect, short-circuit and overload protection. This ensures that only 802.3at and 802.3af devices receive power and non-compliant devices are not accidentally damaged. Using this injector, it is possible to power the latest generation of Wifi 6 devices that require 802.3bt power delivered via 10G multigigabit interfaces, as well as providing backward compatibility with legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, powering Meraki devices with multigigabit 802.3bt Power over Ethernet is a flexible and low-cost method to simplify the installation process while ensuring that network design is not compromised by power availability limitations.

Certifications & Standards

    • FCC Part 15 Class B
    • EN55022 Class B
    • EN55024, EN55032
    • CE
    • VCCI
    • UL 60950-1
    • UL 62368
    • IEEE 802.3bt
    • IEEE 802.3at
    • IEEE 802.3af


Specifications

Product NameMeraki mGig 802.3BT PoE Injector (Power)
Manufacturer Part NumberMA-INJ-6
Product TypePoE Injector
Maximum Output Power60 W
Maximum Output Voltage55 V DC
Country of OriginVietnam
Height6.5"
Width6.4"
Depth2.6"
Form FactorWall Mountable
Protection TypeOverload Protection

Short Circuit

Input Voltage120 V AC

230 V AC

Limited Warranty1 Year
Maximum Frequency60 Hz
Minimum Frequency50 Hz
The Following Are Compatible With Meraki MA-INJ-6

Cisco Systems Meraki MR28 Wi-Fi 6 Indoor Ap

Mfg Part# MR28-HW


Cisco Systems Meraki MR78 Wi-Fi 6 Outdoor Ap

Mfg Part# MR78-HW


Cisco Systems Catalyst 9164I Ap (W6E, Tri-Band 4X4) with Reg-Q

Mfg Part# CW9164I-Q


Cisco Systems Catalyst 9164I Ap (W6E, Tri-Band 4X4) with Reg-Z

Mfg Part# CW9164I-Z



Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Meraki BIG DEAL qualifications:

Purchase a minimum of $10,000 of Meraki products to qualify.


Shop with confidence! Provantage is an authorized Meraki dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Meraki
 
© Copyright 1984-2024 Provantage
Meraki MA-INJ-6