HomeIndexesC2G40881

 

C2G Audio Amplifier 50W 70V

C2G 40881

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase at least $500 of C2G products to qualify.

Transceivers do not qualify.


Manufacturer Part#  40881

UPC Code: 757120408819

Provantage Code:  CBT9FYK

Condition:  Factory New

  • Product Type: Signal Amplifier
  • Country of Origin: Taiwan
  • Product Material: Metal
  • Input Voltage: 230 V AC
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ElectronicsHome ElectronicsHome Theater

Specifications

C2G 40881 Specifications

    Audio Amplifier 50W 70V


At a Glance


    Left View
    • Classroom Audio Amplifier
    • 50 Watts of Power
    • Plenum Rated
    • Conference Room Amplifier
    • Reduces noise in commercial environments
    • Industry standard 25/70 volt design for distributed audio systems
    • Standby mode saves power
    • Designed for installation in Plenum air spaces
    • TAA Compliant
    • C2G 1 Year Warranty

Overview


    Front View

    The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 25/70 Volt design. This amplifier supports many advanced features which make it a perfect fit for most applications
    Noise Reduction:
    Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.
    Standby Mode:
    After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received.
    Accessory Power Output:
    The accessory power output provides 12 Volts DC and 500 mAmps.

Miscellaneous

    • THD + Noise: < ±0.05% @ 1 KHz at nominal level (1 watt)
    • Signal Noise: >80dB
    • Input Sensitivity: -10dBV (316mV)
    • Operating Temperature: 0 TO +50° C / 10% TO 90% RH, Non-condensing
    • Storage Temperature: -25° TO +70° C / 10% TO 90% RH, Non-condensing


Specifications

Product NameAudio Amplifier 50W 70V
Manufacturer Part Number40881
Product TypeSignal Amplifier
Maximum Frequency20 kHz
Minimum Frequency100 Hz
Environmentally FriendlyYes
Product ColorBlack
Product MaterialMetal
Country of OriginTaiwan
Height1.5"
Width4.3"
Depth4.5"
Input Voltage230 V AC
Limited Warranty1 Year
Color FamilyBlack
Impedance18 Kilo Ohm
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following C2G BIG DEAL qualifications:

Purchase at least $500 of C2G products to qualify.

Transceivers do not qualify.


Shop with confidence! Provantage is an authorized C2G dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

C2G
 
© Copyright 1984-2024 Provantage
C2G 40881