VGA EDID emulator designed for use with Aten KVM extenders or video extenders to simulate monitor presence and maintain optimal video signal processing across connections.
IT professionals and AV integrators find this emulator helpful for maintaining consistent VGA video signals with Aten extenders, avoiding signal degradation. However, its VGA-only function limits applicability in modern digital display setups.
REASONS TO BUY
Ensures stable video signal by emulating display presence - prevents resolution drops
Compatible with any Aten KVM or video extender - flexible integration
Compact form factor - easy to deploy in existing setups
CONSIDERATIONS
Limited to VGA interfaces only - not compatible with newer digital video standards
Dependent on Aten extender hardware - limited use outside specific ecosystems
No additional video enhancement features - basic emulation only
BOTTOM LINE
A niche but reliable product for legacy VGA extension scenarios.
2A-130G VGA Edid Emulator F/Any Aten KVM Extender or Video Extender
Highlights
The KA9250 KVM Extender Module allows KH0116 (16-port High Density KVM Switch), and KL0116 (16-port LCD KVM Switch) to be operated from a remote console up to 150m (500 feet) away. The KA9250 module connects to the KH0116 or KL0116s RJ-45 Remote Console port via industry standard Category 5e (or Category 6) cable for a reliable installation. The KA9250 features a custom ASIC to ensure the utmost in reliability and compatibility, that can also sense the distance to the KH0116 or KL0116 and automatically adjust the gain to compensate.
Compatible Splitters (Connect to Port 1): VS132A/134A/138A, VS92A/94A/98A, VS82/84/88, VS0116, VS132, VS102, VS1204T, VS1208T, VS1504, VS1508
Supported Resolutions
Overview
The 2A-130G VGA EDID Emulator is designed for ATEN KVM extender or video extender installations that do not utilize a local monitor at the site where the computer/video source is located. The 2A-130G emulates and stores a default ATEN EDID (Extended Display Identification Information) setting in a non-volatile memory. This means the computer/video source can still "see" the display, even though it is not directly connected.
The 2A-130G is suitable for any ATEN KVM or video extender installation where a monitor is not required at the local site, providing a simple, cost-saving, and convenient solution for display-related boot-up problems.
Features
Extended Display Identification Data (EDID)
LED
Compatibility
Aten Extenders:
CE774
CE775
CE700A
CE750
CE770
CE800B
CE350
CE370
CE250A
CE252
VE150A
VE170
VE200
VE300
VE500
CE750A
VE170RQ
VE170Q
VE150AR
VE150AR
VE170R
VE500RQ
Aten Splitters:
VS132A/134A/138A
VS92A/94A/98A
VS82/84/88
VS0116
VS132
VS102
VS1204T
VS1208T
VS1504
VS1508
Device Supported
Video Device – Monitor – Computer – KVM Extender – Video Extender – Video Splitter – Power Supply
2A-130G VGA Edid Emulator F/Any Aten KVM Extender or Video Extender
Manufacturer Part Number
2A-130G
Product Type
Video Cable
Cable Type
USB/VGA
Connector Type on First End
Powered USB Type A - Male
Connector Type on Second End
HD-15 - Male
Product Color
Blue
Cable Length
1.15 ft
Supported Resolution
1920 x 1200
Connector on First End Details
1 x Powered USB Type A - Male
Connector on Second End Details
1 x 15-pin HD-15 - Male
Product Material
Plastic
Packaged Quantity
1
Material Details
Plastic - housing
WARNING: This product contains a chemical known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
7.8
Shop with confidence! Provantage is an authorized ATEN dealer.