Brings your legacy RoboSHOT HDMI camera and non-USB audio components into your USB conferencing environment and enables you to pair them with a Cisco codec for traditional videoconferencing quality. Extends power, video and control to your camera over a single category cable.
Packaged for Cisco SX20*, SX80 or C-Series codecs; compatible with legacy RoboSHOT 12 and 30 HDMI.
Not compatible with RoboSHOT 12E HDMI and RoboSHOT 30E HDMI cameras.
Key Features:
Simple, clutter-free camera extension with HDBaseT technology
Power, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)
Bridges audio and video for easy soft-client conferencing
Configurable audio matrix with AEC
Simultaneous HDMI, USB 3.0, and HD-SDI outputs
Up to 1080p/60 resolution available over uncompressed USB
Package Contents
OneLINK Bridge Interface
OneLINK HDMI EZIM with mounting screws
Quick-Start Guide
48V power supply with AC cord set(s)
4 x 3-position phoenix-style connectors
1' (0.3m) cat-5 cable, black
3' (0.9m) cat-5 cable, black
3' (0.3m) directional cat-5 cable for Cisco SX20**
1' (0.3m) HDMI cable
3' (0.9m) HDMI cable
1' (0.3m) EIAJ-04 to EIAJ-04 power cable for camera
6' (1.8m) USB 3.0 cable, type A to B
EZCamera RS-232 Control Adapter for Cisco codec serial 9-pin ports
Shop with confidence! Provantage is an authorized Vaddio dealer.