FlexPoint 100FF 100 MM/ST 1310nm/5km to 100 SM/ST 1310nm/30km AC Power
Highlights
The FlexPoint 100FF Single-Mode to Multimode Fiber Converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types.
The FlexPoint 100FF Single-Mode to Multimode Fiber Converter provides a cost-effective solution to extend network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.
The FlexPoint 100FF is a protocol- transparent fiber converter that provides reliable and cost-effective extension of network distances by connecting multimode fiber networks or devices over single-mode fiber cabling.
The FlexPoint 100FF is designed to operate with a constant rate signal between 1Mbps to 100Mbps allowing the converter to be used in Ethernet networks as well as other fiber-to-fiber protocol applications.
No manual configuration is required with the plug-and-play FlexPoint 100FF. Connect the fiber cables to the appropriate interface and the installation is complete.
The FlexPoint 100FF features descriptions of the LED indicators on the label for easy in-the-field installation and maintenance. The LEDs report the availability of power and the detection of devices attached to the fiber ports.
FlexPoint modules can be mounted utilizing optional wall-mounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis.
Certifications & Standards
Compliance:
UL
CE
FCC Class A
IEEE 802.3u 100BASE-FX
Miscellaneous
Input Voltage:
6-15VDC via 2.5mm barrel (0.2A @ 9VDC)
5VDC via Molex connector (0.5A @ 5VDC)
100-120VAC/60Hz (0.04A @ 120VAC)
Package Contents
FlexPoint 100FF ST Multimode 5km to ST Single-Mode 30km US AC Powered
Shop with confidence! Provantage is an authorized Omnitron Systems Technology dealer.