Omnitron Systems Technology Omniconverter 10GPOEBT/SX 100W 2X1G/10G SFP+ - 4x 10/100/1000T DC

Omnitron Systems Technology 3062B-0-24-9 Specifications

Omniconverter 10GPOEBT/SX 100W 2X1G/10G SFP+ - 4x 10/100/1000T DC

Overview

The OmniConverter 10GPoEBT/Sx are unmanaged Ethernet switches that feature two 1/10G uplink ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet user ports. The 10GPoEBT/Sx available with 60W or 100W (IEEE 802.3bt) per user port. The OmniConverter PoE switches are Layer 2 Ethernet switches that forward frames to any port based on their MAC address. All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports. The switches support daisy-chain configurations and redundant uplinks for critical applications that require protection and sub 50ms restoration in the event of an uplink failure. The switches support Dual Device mode that enables the 10GPoEBT/Sx to operate as two independent and isolated Ethernet switches. The 10GPoEBT/Sx modes of operation can be configured using easily accessible DIP-switches. Each DIP-switch function is labeled on the side of the OmniConverter for ease of identification and use. The OmniConverter switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or single-fiber and standard or CWDM wavelengths. The switches automatically negotiate and deliver the power level required by a Powered Device (PD) partner. Depending on the model of the OmniConverter PoE switch, the switch can deliver up to 60 or 100 Watts of power per user port. The switches features a Remote PoE Power Reset that can be configured with a DIP-switch. This feature enables the user to remotely power-cycle and reset each PD increasing network reliability, up time and save manpower time and expense by automating the recovery of remote PD equipment. All models can be wall mounted, rack mounted using a shelf or DIN-rail mounted using DIN-rail mounting clips. They are available with an external 100 to 240V AC power adapter or with a DC terminal connector.

Certifications & Standards

See all products IEEE 802.3, IEEE 802.3ae IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Safety: UL 60950-1, UL-62368-1, IEC 62368:2014 /A11:2017, IEC 60950- 1:2005+A1:2009, EN 60950- 1:2006+A11:2009+A1:2 010+A12:2011 +A2:2013, CAN/CSA C22.2 No. 60950-1, CAN/CSA C22.2 No. 62368-1-14, CE Mark EMC: EN 55032/EN 55024 CE Emissions/Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal:0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: Signal: 3 V, IEC 61000-4-8 ( Magnetic Field), IEC 61000-4-11 IP Rating: IP20 Protection

Miscellaneous

Operating Temperature Range: 0 to +50 deg C

Package Contents

OmniConverter 10GPoEBT/Sx 3062B-0-24-9 Ethernet Switch User Manual