Omnitron Systems Technology Ruggednet 10GPOEBT/Si 60W DC 2X1G/10G SFP+ to 4x 10/100/1000T

Omnitron Systems Technology 3260B-0-24-2Z Specifications

Ruggednet 10GPOEBT/Si 60W DC 2X1G/10G SFP+ to 4x 10/100/1000T

Overview

The RuggedNet 10GPoEBT/Si are industrial ruggedized and temperature- hardened unmanaged Ethernet switches that feature two 1/10G uplink ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet user ports. The 10GPoEBT/Si available with 60W or 100W (IEEE 802.3bt) per user port. The RuggedNet PoE switches are Layer 2 Ethernet switches that forward frames to any port based on their MAC address. All models support Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate uplink port, preventing multicast traffic from flooding other network ports. The switches support daisy-chain configurations and redundant uplinks for critical applications that require protection and sub 50ms restoration in the event of an uplink failure. The switches support Dual Device mode that enables the 10GPoEBT/Si to operate as two independent and isolated Ethernet switches. The modes of operation can be configured using easily accessible DIP-switches. Each DIP-switch function is labeled on the side of the RuggedNet for ease of identification and use. The RuggedNet PoE switches are available with Small Form Pluggable (SFP) transceiver receptacle ports. The SFP ports support 10/100/1000BASE-T, 1000BASE-T and 10GBASE-T copper transceivers. They also support 1G and 10G multimode or single-mode fiber, dual or single-fiber and standard or CWDM wavelengths. The switches automatically negotiate and deliver the power level required by a Powered Device (PD) partner. Depending on the model of the RuggedNet PoE switch, the switch can deliver up to 60 or 100 Watts of power per user port. The switches features a Remote PoE Power Reset that can be configured with a DIP-switch. This feature enables the user to remotely power-cycle and reset each PD increasing network reliability, up time and save manpower time and expense by automating the recovery of remote PD equipment. All models can be wall or rack mounted using a wall mount bracket and shelf or DIN-rail mounted using the included DIN-rail mounting clip. They are available with single or dual DC input power options.

Certifications & Standards

See all products IEEE 802.3, IEEE 802.3ae IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt Safety: UL 60950-1, UL-62368-1, IEC 60950- 1:2005+A1:2009, IEC 62368:2014/ A11:2017, EN 60950- 1:2006+A11:2009+A1:2 010+A12:2011 +A2:2013, CAN/CSA C22.2 No. 60950-1, CAN/CSA C22.2 No. 62368-1-14, CE Mark EMC: EN 55032/EN 55024 CE Emissions/Immunity, IEC 61000-6-4 Industrial Emissions, IEC 61000-6-2 Industrial Immunity EMI: CISPR 32, FCC 47 Part 15 Subpart B Class A EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: Signal: 10 V, IEC 61000-4-8 ( Magnetic Field), IEC 61000-4-11 (General Immunity in Industrial Environments ) IP Rating: IP40 Protection

Miscellaneous

Operating Temperature Range: -40 to +75 deg C

Package Contents

RuggedNet 10GPoEBT/Si 60W IEEE 802.3bt, 2xSFP/SFP+, 4xRJ-45, 2xDC Powered Industrial Temp User Manual DIN Rail Mount