Home Theater HDMI Display-Side Wallplate with Signal Booster
With Tripp Lite's HDMI Display-side Wallplate w/Signal Booster, you can now hide that HDMI cable that's connected to the Flat Screen HDTV hanging on the wall, by running the cable behind the wall and into the back of the faceplate. The built-in signal booster allows the video source (DVR, SAT box, etc.) to be located beyond the 5 meter HDMI length restriction. The signal is fully regenerated to run the last few feet to the display. Where distance limitation is not an issue, see Tripp Lite's Passive Feed-Through Wallplate, P166-001-P.
Cleans up Home Theater installations by hiding HDMI Cables
Built-in Signal Booster fully regenerates weak signals traveling over longer cables
Simple Feed-Through design
Standard electrical outlet size
HDMI Female / Female connection
HDMI v1.3 Compliant
In the box
HDMI Display-side Wallplate w/Signal Booster
Tripp Lite's P166-001-A HDMI Display-side Wallplate with Signal Booster increases the distance a 1080p (24Hz) signal can be transmitted beyond the recommended 16 ft. (5 m.). It supports video resolutions up to 1080p, and a maximum distance of 150 ft. from the source. Use P568-Series HDMI cables in most applications. When extending a 1080p (24Hz) signal more than 75 ft., use cable made with 24Awg wiring, such as the P568-100-HD. (Lengths over 100 ft. are available from Tripp Lite as a custom order) 24Awg HDMI cable is also needed when extending a 3D signal more than 50 ft.. A 3D signal can be extended up to 125 ft. using 24Awg HDMI cable. Simply connect the longer cable between the source and the P166-001-A, and the shorter cable (16 ft. or less) between the adapter and the monitor. Software or drivers are not required. HDCP compliant.