HomeIndexesNVIDIAMFS1S00-H050E

NVIDIA Active Fiber Cable Ib HDR Up to 200GB/S

NVIDIA MFS1S00-H050E

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
QTY 10 Adapters with Support

QTY 2 Switches with Support

QTY 20 Cable

Transceivers alone do not qualify.


LinkX

Manufacturer Part#  MFS1S00-H050E

Provantage Code:  MLNX2HK

Condition:  Factory New

  • Product Type: Network Cable
  • Connector Type on First End: SFF-8665 QSFP56 Network
  • Cable Type: Fiber Optic
  • Data Transfer Rate: 200 Gbit/s
  • Jacket Type: LSZH

Big DealsSatisfaction Guaranteed

CablesCabling AccessoriesVarious Cables

Specifications

NVIDIA MFS1S00-H050E Specifications

    Active Fiber Cable Ib HDR Up to 200GB/S


Overview

    NVIDIA MFS1S00-H050E Active Optical Cable InfiniBand HDR up to 200Gb/s QSFP56 LSZH Black Pulltab 50m200Gb/s HDR QSFP56 MMF Active Optical Cable

    NVIDIA Networking MFS1S00-HxxxE is a QSFP56 VCSEL-based (Vertical Cavity Surface-Emitting Laser) active optical cable (AOC) designed for use in 200Gb/s InfiniBand HDR systems. The MFS1S00-HxxxE AOC offers high port density and configurability, and a much longer reach than passive copper cables in the data centers. Since the AOC is hot pluggable, it is easy to install and replace.

    MFS1S00-HxxxE has a standard SFF-8665 compliant QSFP56 port on the electrical side towards the host system. It contains four multi-mode fibers (MMF) optic transceivers per end; each operating at data rates of up to 50Gb/s. MFS1S00-HxxxE offers selectable retiming per lane for both its optical transmitters and receivers up to 50Gbp/s rates.

    Rigorous production testing ensures the best out-of-the-box installation experience, performance and durability. unique quality active fiber cable solutions provide power-efficient connectivity for data center interconnects. They enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers.

    Highlights

    • Supports IBTA InfiniBand HDR
    • Up to 200Gb/s data rate
    • 4x 50Gb/s PAM4 modulation
    • Programmable Rx output amplitude and pre-emphasis
    • SFF-8665 compliant QSFP56 port
    • Single 3.3V power supply
    • 4.35W power dissipation (typ., each end with retiming)
    • Bit Error Rate (BER) better than 1E-15
    • Up to 150m length
    • Hot pluggable
    • RoHS compliant
    • SFF-8636 compliant I2C management interface

Features

Device Supported

    Network Device

    Transmitter

    Receiver


Specifications

Product NameActive Fiber Cable Ib HDR Up to 200GB/S
Manufacturer Part NumberMFS1S00-H050E
Product TypeNetwork Cable
Cable TypeFiber Optic
Connector Type on First EndSFF-8665 QSFP56 Network
Connector Type on Second EndSFF-8665 QSFP56 Network
Fiber Optic ModeMulti-mode
Product ColorBlack

Aqua

Cable Length164.04 ft
Environmentally FriendlyYes
Connector on First End Details1 x SFF-8665 QSFP56 Network
Connector on Second End Details1 x SFF-8665 QSFP56 Network
Data Transfer Rate200 Gbit/s
Product LineLinkX
Jacket TypeLSZH
Limited Warranty1 Year
Color DetailsBlack - Pulltab
WARNING: The plastic used in cable products can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following NVIDIA BIG DEAL qualifications:

QTY 10 Adapters with Support

QTY 2 Switches with Support

QTY 20 Cable

Transceivers alone do not qualify.


Shop with confidence! Provantage is an authorized NVIDIA dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

NVIDIA
 
© Copyright 1984-2024 Provantage
NVIDIA LinkX MFS1S00-H050E