IOGEAR Additional Transmitter for IOGEAR GWLRSSKIT4K Long Range Wireless 4K Video Transmitter

IOGEAR GWLRSSKIT4KTX Specifications

Additional Transmitter for IOGEAR GWLRSSKIT4K Long Range Wireless 4K Video Transmitter & Receiver Kit; Adds An Additional 4K Or 1080P HDMI Source (Up to 10) Forwireless Video Switching GWLRSSKIT4KT

At a Glance

Adds an additional source to the GWLRSSKIT4K in Switch Mode so user can change sources independently from TV connected to transmitter (Maximum of 10 transmitters per receiver) 4K HDMI pass-through with maximum resolution of 4096x2160@60Hz for local monitor Maximum 4K wireless resolution of 4096x2160@30Hz for remote monitor Range up to 600 feet with a single receiver under optimal conditions, using built-in MIMO technology IR extender allows control of video source from remote display RS-232 port to extend control to end devices such as projector with RS-232 port Remote Console feature provides 2 USB ports for keyboard and mouse, allowing user to remotely control a PC or laptop Auxiliary audio input for external mic or alternate audio connection Supports most video sources with HDMI output resolutions from 640x480 to 4096x2160@60Hz Very low latency (average latency <10ms)

Overview

Interchangeable Long Range Wireless SPlitter & Switcher Technology for Any AV Solution IOGEAR Long Range Wireless 4K Switch/Splitter Transmitter operates as either a wireless HDMI switcher to swap between up to 10* UHD sources ot a wireless splitter sending a single UHD source to up to four 4K HDTVs or HD projectors anywhere up to 600 ft. or 182 meters** without sacificing picture and sound quality. Expand Your GWLRSSKIT4KTX Setup Add additional recievers to expand up to four 4K HDTVs or displays in splitter mode. Easily Switch Between Splitter and Switch Mode Configure the Long Range Wireless 4K Switch/Splitter Kit as an HDMI switcher to wireless swap between up to four 4K sources including UHD 4K Blueray™ players, set-top boxes, HDMI-capable laptops, or PCs to a single 4K HDTV within a 600 ft. range. Expand the system with additional transmitters (for switch model) ot extra recievers (for splitter mode). Fast, Plug-n-Play Setup Setup is hassle-free and does not require a Wi-Fi network or complicated security configurations. The included transmitter and receiver kit come pre-paired and ready with wireless security enabled. Control Sources Remotely Control each HDMI video source with your existing remote control. The included IR blast cable and IR extension cable allow signal transmission between your remote and audio/video equipment. Take control of your PC or Laptop wirelessly with keyboard and mouse support.

Package Contents

See all products Additional Transmitter for GWLRSSKIT4K Long Range Wireless 4K Video Kit 1 x 12V/1A Power Supply. 2 x Antennas. 1 x Mounting Kit. 1 x IR Emitter Cable. 1 x HDMI Cables. 1 x Quick Start Guide for Transmitter. 1 x Warranty Card