Cisco Systems 1 Port Shared Port Adapter FD

Cisco Systems SPA-1X10GE-L-V2-RF Specifications

1 Port Shared Port Adapter FD

Overview

The Cisco 1-Port 10-GE SPA is available on high-end Cisco routing platforms, offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus on investment protection along with consistent feature support, broad interface availability, and the latest technology. The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM, Ethernet, etc.) on the same interface processor.

Compatibility

See all products Cisco 7600 Series Router Cisco 12000 Series Router Cisco XR 12000 Series Router Cisco CRS-1 Carrier Routing System

Miscellaneous

Refurbished No Returns Jumbo frames support (9188 bytes) 802.3x flow control Bridge protocol data unit (BPDU), Cisco Discovery Protocoland VLAN Trunking Protocol (VTP) filtering Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling Layer 2 access list (MAC address-based filtering) Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC accounting on the egress) Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address filtering entries per port Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy- check (CRC) error drops; packet sizes; and unicast, multicast, and broadcast packets Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast packets Per-port byte counters for good bytes and dropped bytes