3M Fiber Mode Conditioning 2XST 62.5/125 to 1XLC 62.5/125/1XLC9/125
Overview
This is a 3m LC (male) to ST (male) orange duplex riser-rated fiber mode conditioning cable. OM1 & OS1 eliminates differential mode delay signals by aligning the single-mode launch away from the center of a multimode fiber core. This creates a transmitted signal that is similar to typical multimode light emitting diode (LED) launches. This optical fiber, nonconductive, riser (OFNR) cable is best suited for use in interior fiber-optic applications. A duplex cable is a two-strand fiber optic patch cable that works best with transceivers that both transmit and receive. Our patch cables are 100% compliant for all of your networking needs. Our products are guaranteed by federal law to not affect or void OEM warranties.
3M Fiber Mode Conditioning 2XST 62.5/125 to 1XLC 62.5/125/1XLC9/125
Manufacturer Part Number
ADD-MODE-STLC6-3
Product Type
Network Cable
Cable Characteristic
Patch Cable
Cable Type
Fiber Optic
Connector Type on First End
ST Network - Male
Connector Type on Second End
LC Network - Male
Fiber Optic Mode
Multi-mode
Single-mode
Cable Length
9.84 ft
Core / Cladding Diameter
9/125 µm
62.5/125 µm
Jacket Material
Low Smoke Zero Halogen
Connector on First End Details
2 x ST Network - Male
Connector on Second End Details
2 x LC Network - Male
Country of Origin
United States
Device Supported
Network Device
Jacket Type
LSOH
Limited Warranty
3 Year
WARNING: The plastic used in cable products can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.