Tripp Lite SmartOnline 8kVA RT 8U Hardwired 208V Online 18-Out 12X 5-15/20R

Tripp Lite SU8000RT3U1TF Specifications

SmartOnline 8kVA RT 8U Hardwired 208V Online 18-Out 12X 5-15/20R

Summary

Rear View 8,000VA (8kVA) on-line, double-conversion UPS system for critical server, network and telecommunications equipment. Installs in only 8 rack spaces (3U power module, 3U battery pack and 2U step-down transformer). Maximum installed rack depth of 32.5 in. Expandable battery runtime with optional BP240V10RT3U and BP240V32 external battery packs. Full-time sine wave 208 and 120V +/-2% output. Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V. Standard 3-wire 208V hardwire input connection; NEMA L6-30R, L6-20R and Nema 5-15/20R output receptacles. Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without disrupting power to connected equipment. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces support communications via RS-232, contact-closure port and optional SNMPWEBCARD slot. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC conversion, DC-to-AC conversion, bypass mode and output power status. LCD panel with scroll buttons offers detailed diagnostic test information on startup and during self tests, plus real-time data on input and output voltage, frequency (Hz), load percentage and battery charge level. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories and 2-9USTAND tower kit included; 2POSTRMKITWM two post rackmount hardware accessories available. Field replaceable, hot-swappable power module and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended warranty and service contracts available.

Details

Features Include 8,000 VA (8kVA) on-line, double-conversion UPS system (High voltage input / High AND low voltage output) Detachable input-output PDU module with manual bypass switch enables hot-swap UPS replacement without powering off connected equipment Installs in only 8 rack spaces (3U power module / 3U battery pack / 2U step-down transformer) with a maximum installed depth of 32.5 inches Offers 6 min. runtime at full load (8000VA/6400W) and 15 min. at half load (4000VA/3200W). Runtime is expandable with any number of optional BP240V10RT3U or BP240V32 external battery packs Full-time sine wave 208V and simultaneous 120V +/-2% output Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output Operates continuously without using battery power during brownouts to 156V and overvoltages to 276V Standard 3-wire 208V hardwire input connection 2 x NEMA L6-30R, 2 x L6-20R and 12 x 5-15/20R output receptacles Detailed LCD panel with scroll buttons offers detailed diagnostic test Network-grade AC surge and noise suppression Zero transfer time between AC and battery operation Includes slot for internal SNMP/web card, plus DB9 enhanced serial monitoring port, and contact closure port for unattended shudown, remote control and monitoring of UPS system and power data Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling Emergency Power Off (EPO) interface Front panel LEDs offer at-a-glance confirmation of line power status, battery power status, AC-to-DC & DC-to-AC conversion, bypass mode and output power status. Fault-tolerant auto-bypass mode prevents loss of output during UPS fault conditions or excessive UPS loading 4 post rackmount and upright tower installation accessories included. 2POSTRMKITWM two post rackmount hardware accessories available Field replaceable, hot swappable power module and external battery packs Attractive all-black color scheme 2-year warranty: $250,000 connected equipment insurance Extended warranty and service contracts available In the box 3U power module with detachable hot-swap PDU input/output panel and bypass switch 3U external battery pack, 2U step-down transformer Three sets of 4 post rackmount rails (one for each of the 2U and 3U components) One set of tower stands for upright tower configuration PowerAlert software, complete data cabling, user manual with warranty information

At a Glance

8kVA / 8000VA / 7200W on-line double-conversion UPS, 0.9 output power factor Included maintenance bypass switch enables live replacement of UPS with zero downtime 208/120V +/-2% output at 60Hz, High efficiency economy mode option 8U Rack/Tower compatible, Hot-swap power and battery modules USB, RS232, EPO ports, Support for SNMP/WEB and other card options Front panel LEDs with detailed LCD monitoring and control screen Expandable runtime with optional external battery packs Hardwire input (3 wire), L6-30R, L6-20R & 5-15/20R outlets

Overview

Front View SmartOnline SU8000RT3U1TF 8kVA Tower/Rack Mountable UPS Ideal for protection of sensitive electronics in any application calling for upright tower or 19 inch rackmount UPS protection. Common applications include any mix of servers, workstations, hubs, routers, concentrators, IP telephony and traditional PBX switching systems.

Miscellaneous

See all products Supports detailed monitoring of equipment load levels, self-test data and mains power conditions via network interfaces. Includes PowerAlert monitoring software and complete cabling Network-grade AC surge and noise suppression Actively converts raw incoming AC power to DC, then re-converts output back to completely regulated, filtered AC output