HomeIndexesTripp LiteNPOE-EXT-2X1G30

Tripp Lite 2-Port Gigabit Ethernet PoE+ Extender/Repeater-CAT5E/6/6A, 95W, IP67, IK10,328 Ft. (100 M)

Tripp Lite NPOE-EXT-2X1G30

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Model NPOE-EXT-2X1G30

UPC Code: 037332267146

Provantage Code:  TRPG03M

Condition:  Factory New

  • Product Type: Network Extender
  • Limited Warranty: 2 Year
  • Maximum Data Transfer Rate: 128 MB/s
  • Product Color: Silver
  • Maximum Extended Range: 1312.34 ft
  • TAA Compliant: No

Big DealsSatisfaction Guaranteed

NetworkingWireless Networking DevicesTransmitters/Receivers

Specifications

Tripp Lite NPOE-EXT-2X1G30 Specifications

    2-Port Gigabit Ethernet PoE+ Extender/Repeater-CAT5E/6/6A, 95W, IP67, IK10,328 Ft. (100 M)


At a Glance

    • Saves money by delivering 95W of power + data up to 328 ft. through existing cabling
    • Cascade up to 3 extenders to extend PoE connection up to 1,312 ft. total
    • Supports Gigabit Ethernet data transfer speeds up to 1000 Mbps (1 Gbps)
    • IP67 rated to resist dust and endure immersion in 1 m of water up to 30 min.
    • IK10 rated to resist 20 joules on impact, such as a blow from a 10 kg hammer
    • 2-year limited warranty

Overview

    Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 400 Meters
    This dual-port extender/repeater allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and two remote PoE devices an extra 328 feet (100 meters). In addition, by cascading as many as three NPOE-EXT-2X1G30 extenders, you can extend that connection as far as 1,312 feet (400 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each.

    Saves You Time and Money on Unnecessary Equipment Updates
    The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power per port using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.

    Supports Power over Ethernet to Save You Money and Give You More Installation Choices
    Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE devices against short circuits and overloads.

    IP67 Rating Denotes Resistance to Dust, Sand and Water
    The IP67 rating means the aluminum housing is 100% protected against dust and sand. The housing can also endure immersion in one meter of water for up to 30 minutes, as well as water spray from all directions, such as from a nozzle, with no damage or decline in performance.

    IK10 Rating Denotes Resistance to Vandalism
    The IK10 rating (the strongest IK rating) means the aluminum housing is vandal-resistant up to 20 joules - the equivalent of dropping an 11-pound weight on the extender from a distance of 15 inches.

    Simple Plug-and-Play Installation Has Your Device Connected in Minutes
    No configuration or software is required to add the NPOE-EXT-2X1G30 to your LAN. Just connect your switch or network jack and your PoE/PoE+ devices to the shielded Power + Data ports using existing Cat5e/6/6a cable. A green LED indicates the unit is receiving a signal and is ready to transmit data and power.

    Designed for Installation Almost Anywhere
    Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing is compact enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

Package Contents

    • NPOE-EXT-2X1G30 2-Port Gigabit Ethernet PoE+ Extender/Repeater
    • 3 x Waterproof Cable Connectors
    • Wrench
    • Quick Start Guide

Additional Product Images


Specifications

Product Name2-Port Gigabit Ethernet PoE+ Extender/Repeater-CAT5E/6/6A, 95W, IP67, IK10,328 Ft. (100 M)
Product TypeNetwork Extender
Maximum Extended Range1312.34 ft
Product ColorSilver
Environmentally FriendlyYes
Maximum Data Transfer Rate128 MB/s
Number of Network (RJ-45) Ports2
Network (RJ-45)Yes
Color FamilySilver
Country of OriginChina
Height5.9"
Width2.9"
Depth1.7"
Product ModelNPOE-EXT-2X1G30
Limited Warranty2 Year
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2024 Provantage
Tripp Lite Model NPOE-EXT-2X1G30