HomeIndexesTripp LiteB110-SP-CAT-OD

Tripp Lite Outdoor In-Line PoE Surge Protector - IP66 Rated, 1 Gbps, Cat5e/6/6a, IEC, TAA

Tripp Lite B110-SP-CAT-OD

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Model B110-SP-CAT-OD

UPC Code: 037332252104

Provantage Code:  TRP93T1

Condition:  Factory New

  • Product Type: Surge Protector Module
  • Limited Warranty: 2 Year
  • Receptacles: 2 x RJ-45
  • Dataline Protection: Ethernet
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ComputingPower AccessoriesSurge Suppressors

Specifications

Tripp Lite B110-SP-CAT-OD Specifications

    Outdoor In-Line PoE Surge Protector - IP66 Rated, 1 Gbps, Cat5e/6/6a, IEC, TAA


At a Glance

    • Easy to connect between mid- or end-span PoE source and device using Cat5e/6/6a cabling
    • Dustproof, shockproof and IP66-rated to endure powerful jets of water from any direction
    • Supports 802.3af/at/bt IEEE standards and Ethernet data speeds up to 1 Gbps
    • Plug-and-play operation with no external power required for immediate installation
    • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
    • 2-year limited warranty

Overview

    Outdoor In-Line Surge Protector Keeps Your 1G PoE Edge Network Equipment Safe

    Ideal for home/corporate security systems, wireless access points, routers, bridges and other PoE (Power over Ethernet) applications, the B110-SP-CAT-OD protects outdoor-mounted network equipment from damage caused by lightning, power surges, electrostatic discharge (ESD) and cable discharge events. Just connect it between your source and network equipment using standard 23/24 AWG Cat5e/6/6a cables (sold separately) and the included cable glands. Both mid-span and end-span PoE are supported. Note: two B110-SP-CAT-OD surge protectors are required to protect both source and device.

    Your Last Defense Against Intruding Voltage Spikes That Can Cause Costly Downtime

    Thyristor diode technology features low impedance and superior power handling capabilities, providing protection against ESD and super-fast response time under one nanosecond. Gas discharge modules on all four twisted pairs protect each wire from surges or spikes by dissipating the voltage transient through a contained plasma gas. Line-to-line and line-to-ground protection modes help protect against short circuits and minimize distortion of high-speed signals. The B110-SP-CAT-OD meets the following IEC regulations: IEC 61000-4-2 (ESD) +/- 15kV (Air), +/- 8kV (Contact) and IEC 61000-4-5 (Lightning) 10kA (8/20µs), 20kV (8/20µs).

    IP66 Rating Denotes Resistance to Dust and Water

    The housing's IP66 rating means the surge protector is not only 100% protected against dust, but also able to endure high-pressure jets of water from any direction with no damage or decline in performance. In addition to its water and dust resistance, which keeps it safe in storms and other foul weather, the B110-SP-CAT-OD is shockproof, giving you peace of mind without worrying about the unit being jarred and damaged.

    Ready to Use Right from the Package, So You Can Plug and Play Immediately

    This PoE in-line surge protector meets 802.3af, 802.3at and 802.3bt IEEE standards, supporting up to 90W of DC power (due to power dissipation, powered devices receive 71W) and Ethernet data speeds up to 1 Gbps. No external power supply is required. Rear mounting holes allow for convenient installation where needed, such as high on a wall or pole. The distance between the B110-SP-CAT-OD and the equipment it is protecting should not exceed 328 feet (for best performance, the installation's total cable distance should not exceed 328 feet).

    TAA-Compliant for GSA Schedule Purchases

    The B110-SP-CAT-OD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Package Contents

    • B110-SP-CAT-OD Surge Protector Module
    • Grounding Wire, 18 AWG, 1 ft.
    • 2 x Metric Cable Glands, 8.4 mm
    • 2 x PCBA Mounting Screws
    • 4 x Surface Mounting Screws
    • 4 x Surface Screw Anchors
    • 4 x Unit Cover Screws
    • Owner's Manual

Additional Product Images


Specifications

Product NameOutdoor In-Line PoE Surge Protector - IP66 Rated, 1 Gbps, Cat5e/6/6a, IEC, TAA
Product TypeSurge Protector Module
TAA CompliantYes
Receptacles2 x RJ-45
Dataline ProtectionEthernet
Environmentally FriendlyYes
Country of OriginChina
Height6.5"
Width3.2"
Depth2.8"
Product ModelB110-SP-CAT-OD
Power Handling90 VA
Limited Warranty2 Year
Supplies/Accessories for Tripp Lite B110-SP-CAT-OD

Tripp Lite 6ft CAT6 Gigabit Snagless Molded Patch Cable Black

Mfg Part# N201-006-BK




Tripp Lite 10ft Cat6 Gigabit Molded Patch Cable (RJ45 M/M) Black

Mfg Part# N200-010-BK


Tripp Lite 3ft Cat6 Gigabit Molded Patch Cable (RJ45 M/M) Black

Mfg Part# N200-003-BK


Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2024 Provantage
Tripp Lite Model B110-SP-CAT-OD