SY-ADA40090 2.5" Dual MSATA SSD to SATA 3 RAID Enclosure with Screw Set
Overview
Rear View
SYBA SY-ADA40090 utilizes your mSATA SSD to upgrade your system for faster performance and reliability. This enclosure will allow you to connect two of your mSATA SSD to a SATA III interface to create your own standard 2.5" SSD in RAID. Use the RAID functionality to increase performance and redundancy. Create a new boot drive for your laptop or add in speed for your computer tower. Dual mSATA SSD to SATA III RAID Enclosure with Complete Screw Set
Application/Usage
Laptop
PC
Miscellaneous
Front View
Complies with Serial ATA Specification Rev 3.2
Supports SATA III Host and Two mSATA NGFF SSD Devices
Built In ASM1092R High Performance Processor
Supports SATA III, SATA II, and SATA I Operation
Standard 2.5" SATA Storage Device Form Factor (100mm x 70mm x 9.2mm)
RAID Mode Switch by Hardware Strapping or GUI Controller
RAID Mode 3 Switch Control
Supported RAID Modes: RAID 0, RAID 1, JBOD
Transparent to OS
No Drivers Needed
Can Be a Primary Bootable Device Containing OS--However, Might Require Re-Installation of OS
LED Indicators: Green LED Indicates SATA 3 Host Active, Red LED Indicates M.2 NGFF SSD Error
SY-ADA40090 2.5" Dual MSATA SSD to SATA 3 RAID Enclosure with Screw Set
Manufacturer Part Number
SY-ADA40090
Product Type
mSATA to SATA III Adapter
Country of Origin
Taiwan
Environmentally Friendly
Yes
Packaged Quantity
1
Limited Warranty
1 Year
WARNING: Products made from polycarbonate or other plastics can expose you to chemicals including bisphenol A, which are known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Shop with confidence! Provantage is an authorized SYBA Multimedia, Inc dealer.