StarTech.com IDE to SATA Drive Adapter - 40-Pin PATA to 2.5" SATA Hard Disk Drive/ODD

StarTech.com IDE2SAT2 Specifications

StarTech.com IDE to SATA Drive Adapter - 40-Pin PATA to 2.5" SATA Hard Disk Drive/ODD

At a Glance

Rear View Connect a SATA device to an IDE/ATA motherboard or controller card Complete hardware solution; no software required Support for 48-bit Logical Block Addressing (LBA) Compliant with SATA revision 1.0 specification Supports SATA I/II/III (1.5/3/6Gbps) drives Compatible with Ultra ATA 133 specification Supports 2.5" , 3.5" , and 5.25" SATA Drives ODD (Optical Disk Drive) support, including Blu-ray, DVD, and CD-ROM drives

Overview

The IDE2SAT240-pin IDE toSATA adapter enables you to connect a SATA I/II/III drive to an availableIDE/ATA 33/66/100/133 motherboard port -a cost effective solution that allows you to add newer SATA drives, andkeepyourexisting motherboard. The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer 2.5"/3.5"/5.25" SATA drive and older IDE motherboard port. The IDE2SAT2 also features ODD (Optical Disk Drive) support, allowing you to a add Blu-ray, DVD, orCD-ROM drives to an older IDE motherboard. TheIDE/SATA adapter is backed by a StarTech.com 2-year Warranty and free lifetime technical support. More from the Manufacturer

Compatibility

Blu-ray drive DVD drive CD-ROM drive

Certifications & Standards

CE FCC

Environmental Certification

Front View RoHS REACH WEEE

Miscellaneous

See all products Chipset ID: Marvell - 88SA8852 1 x IDE (40 Pin; EIDE/PATA) 1 x SATA Data & Power Combo (7+15 pin) 1 x SP4 (4 pin; Small Drive Power) Maximum Data Transfer Rate: 133MB/sec Product Length: 75.5 mm Support for 48-bit Logical Block Addressing (LBA) Supports 2.5" , 3.5" , and 5.25" SATA Drives

Package Contents

40-Pin IDE PATA to SATA Adapter Converter for HDD/SSD/ODD 1 x LP4 Molex to SP4 Power Cable 1 x Instruction Manual