PCIE SC-SA0T11-S1 SATA 6GB/S 3I+1 Hybrid Adapter with SSD Socket
Overview
SIIG's SATA 6Gb/s 3i+1 SSD Hybrid PCIe adds 3 internal SATA 6Gb/s channels and 1 SATA SSD socket to your PCIe-equipped system. It is embedded with the fully-automated HyperDuo technology to enable SSD performance at 1/3 of the cost to work flawlessly with the leading 6Gb/s HDDs. This cost-effective hardware RAID (RAID 0, 1, 10) SATA host controller significantly enhances system performance by the capability of SSD acceleration to reduce system boot-up time and allows data to be stored on the high capacity of HDD data storage for cost saving.
PCIE SC-SA0T11-S1 SATA 6GB/S 3I+1 Hybrid Adapter with SSD Socket
Manufacturer Part Number
SC-SA0T11-S1
Product Type
SATA Controller
RAID Supported
Yes
Total Number of SATA Ports
3
Form Factor
Plug-in Card
RAID Levels
0
1
10
Controller Type
Serial ATA/600
Host Interface
PCI Express x2
Environmentally Friendly
Yes
Environmental Certification
RoHS
Country of Origin
China
Height
4.7"
Width
5.8"
Packaged Quantity
1
Limited Warranty
5 Year
Thickness
0.8"
WARNING: Products with exposed solder can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always wash your hands after handling and avoid inhalation of fumes if heating the solder. For more information go to www.P65Warnings.ca.gov.
Shop with confidence! Provantage is an authorized SIIG Inc. dealer.