HomeIndexesSanDiskSD9SB8W-2T00

SanDisk 2TB Client SATA SSD Drive 2.5 inch

SanDisk SD9SB8W-2T00

Series X600

Manufacturer Part#  SD9SB8W-2T00

Provantage Code:  SNDK48M

Condition:  Factory New

  • Product Type: Solid State Drive
  • Storage Capacity: 2 TB
  • Drive Interface: SATA
  • Limited Warranty: 5 Year
  • Maximum Read Transfer Rate: 560 MB/s

Satisfaction Guaranteed

StorageHard Disk DrivesHard Drives - Solid State

Specifications

SanDisk SD9SB8W-2T00 Specifications

    2TB Client SATA SSD Drive 2.5 inch


At a Glance

    • WESTERN DIGITAL 64-LAYER 3D NAND DELIVERS CAPACITIES UP TO 2TB FOR A MULTITUDE OF DESIGN OPTIONS
    • ACTIVE POWER DRAW UP TO 25% LESS POWER THAN THE PREVIOUS GENERATION OF 2D SSDS
    • 2/5"/7MM CASED OR M.2 2280 FORM FACTORS PROVIDE NEEDED SPACE SAVINGS AND DESIGN FLEXIBILITY.
    • LEADING EDGE SATA PERFORMANCE UP TO 560MB/S SEQUENTIAL READ

Overview

    EXCEPTIONAL STORAGE OPTIONS FOR A BROAD RANGE OF COMPUTING APPLICATIONS

    High Performance and High Capacity for Computing

    Based on Western Digital 64-layer 3D NAND, the SanDisk® X600 3D NAND SATA SSD delivers high performance, high capacity, and superior endurance. In capacities of up to 2TB, the X600 3D NAND SATA SSD achieves this while expending up to 25% less power than our previous generations of SATA SSDs.

    The X600 3D NAND SATA SSD combines Western Digital's state-of-the-art 64-layer 3D NAND technology with our proven SSD platform. It also incorporates nCache™ 2.0, a tiered caching technology designed to improve responsiveness for corporate and consumer workloads. nCache 2.0 uses a combination of both SLC (single level cell) and TLC flash blocks to improve endurance, increase efficiency, and boost performance. Writing data first to the SLC cache reduces write amplification on the TLC blocks.

    Lower Power, Higher Capacity and Thin Form Factors Offers Design Flexibility

    The X600 3D NAND SATA SSD is optimized for the demanding power management requirements of ultra-thin and small form factor products.

    It features Device Sleep (DEVSLP), more frequent use of low-power modes, and faster transitions between various power modes. Also included for superior error recovery, DataGuard™ Client provides a robust on-the-fly error handling technology

    With a variety of design and integration options for manufacturers and systems builders, the X600 3D NAND SATA SSD is available in either an SATA 2.5"/7mm cased or an M.2 2280 form factor, with capacities of 128 gigabytes (GB), 256GB, 512GB, 1 terabyte (TB), and 2 terabyte (TB).


Specifications

General Information
Product Name2TB Client SATA SSD Drive 2.5 inch
Manufacturer Part NumberSD9SB8W-2T00
Product SeriesX600
Product TypeSolid State Drive
Technical Information
Storage Capacity2 TB
Interfaces/Ports
Drive InterfaceSATA
Drive Interface StandardSATA/600
Drive Performance
Maximum Read Transfer Rate560 MB/s
Maximum Write Transfer Rate530 MB/s
Endurance (TBW)500 TB
Network & Communication
Wireless LANNo
Physical Characteristics
Drive TypeInternal
Form Factor2.5"
Height0.3"
Width2.8"
Depth3.9"
Warranty
Limited Warranty5 Year
Other Information
Product FamilyX600
Operating Power Consumption3.80 W
Considering a Volume Purchase?

Shop with confidence! Provantage is an authorized SanDisk dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

SanDisk
 
© Copyright 1984-2020 Provantage
SanDisk Series X600 SD9SB8W-2T00