Omnitron Systems Technology 10/100 Base-T/100 Base-F Flexpoint 10/100 SC SM 1310 30KM DC

Omnitron Systems Technology 4341-9 Specifications

10/100 Base-T/100 Base-F Flexpoint 10/100 SC SM 1310 30KM DC

At a Glance

The FlexPoint 10/100 is a 10BASE-T or 100BASE-TX copper to 100BASE-FX fiber media converter The RJ-45 port supports auto or manual negotiation Extends network distances up to 120km Supports 100BASE-FX fixed-fiber (SC, ST or LC) and 100BASE-FX SFP transceivers Labeled status LEDs and switches for quick and easy installation Auto MDI/MDI-X crossover Available in AC and DC models Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint Powered Chassis Completely software independent with no installation of drivers required Commercial (0 to +50°C), wide (-40° to +60°C) and extended (-40°C to +75°C) temperature ranges Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support

Overview

See all products The FlexPoint 10/100 is a modular 10BASE-T or 100BASE-TX copper to 100BASE-FX fiber media converter that provides reliable and cost-effective network connectivity and fiber extension. The FlexPoint 10/100 features a 10/100 auto-sensing RJ-45 port that adjusts to the highest level of performance supported by the attached device. An override switch provides manual control over the 10/100 operation of the RJ-45 port and the Half/Full-Duplex operation of both the fiber and RJ-45 ports. When configured for auto-negotiation, the RJ-45 port automatically detects and sets MDI/MDI-X crossover. When configured for manual operation, the FlexPoint 10/100 features a manual switch to provide the MDI/MDI-X crossover. The fiber port supports fixed-fiber connectors (SC, ST or LC) and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The FlexPoint 10/100 supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or specific network requirements. The LEDs report the availability of power, port activity and link status, speed and duplex modes. FlexPoint modules can be mounted utilizing optional wall-mounting hardware or with DIN-rail mounting brackets. They can also be rack-mounted in a 5-Module shelf or in a high-density 14-Module, power-redundant Powered Chassis. FlexPoint modules installed in the 5-Module shelf or used as standalone devices can be powered by an external AC to DC power adapter, 2-pin DC terminal connector or through the 5VDC chassis connector. Standalone modules can also be powered by attaching an external DC power supply (18-60VDC). When used in the 14-Module power-redundant Powered Chassis with any combination of AC and DC power supplies, the installed modules are powered via the 5VDC chassis connector. The wide variety of FlexPoint mounting and power options provide flexible upgrade paths as network requirements change and grow. FlexPoint unmanaged media converters are easy to use and provide dependable fiber connectivity in Enterprise and Government networks around the world.