HomeIndexesMellanox TechnologiesMCP7F00-A002R30N

Mellanox Technologies 2M Passive Cop Hybrid Cable 100GBE 4X25GBE

Mellanox Technologies MCP7F00-A002R30N

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Please contact your Provantage sales rep for qualifying details.


Manufacturer Part#  MCP7F00-A002R30N

Provantage Code:  MLNX290

Condition:  Factory New

  • Product Type: Network Cable
  • Connector on First End: QSFP28 Network
  • Cable Type: QSFP28/SFP28
  • Device Supported: Network Device
  • Cable Characteristic: Splitter Cable

Big DealsSatisfaction Guaranteed

CablesNetworking CablesNetworking Cables


Mellanox Technologies MCP7F00-A002R30N Specifications

    2M Passive Cop Hybrid Cable 100GBE 4X25GBE

At a Glance

    • 100GbE to 4x25GbE data rate
    • 40GbE to 4x10GbE data rate
    • SFF-8402 SFP28 compliant
    • SFF-8665 QSFP28 compliant
    • Operating case temperature 0-70°C
    • Single 3.3V supply voltage
    • Bit Error Rate (BER) better than 1E-15 with Mellanox systems
    • Hot pluggable
    • RoHS compliant
    • LSZH (Low Smoke Zero Halogen) jacket


    Mellanox MCP7F00-A002R30N Passive Copper Hybrid Cable ETH 100GbE to 4x25GbE QSFP28 to 4xSFP28 2m Colored 30AWG CA-N

    Mellanox MCP7F00-A0xxRyyz DAC splitter cables are a high speed, cost-effective 100GbE to 4 x 25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

    MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.

    MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

    Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

    Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.



    Halogen Free



Product Name2M Passive Cop Hybrid Cable 100GBE 4X25GBE
Manufacturer Part NumberMCP7F00-A002R30N
Product TypeNetwork Cable
Cable CharacteristicSplitter Cable
Cable TypeQSFP28/SFP28
Cable Length6.56 ft
Connector on First End1 x QSFP28 Network
Connector on Second End4 x SFP28 Network
Environmentally FriendlyYes
Environmental CertificationRoHS
American Wire Gauge30 AWG
Data Transfer Rate100 Gbit/s
Device SupportedNetwork Device
Product LineLinkX
Limited Warranty1 Year
WARNING: The plastic used in cable products can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Mellanox Technologies BIG DEAL qualifications:

Please contact your Provantage sales rep for qualifying details.

Shop with confidence! Provantage is an authorized Mellanox Technologies dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Mellanox Technologies
© Copyright 1984-2022 Provantage
Mellanox Technologies LinkX MCP7F00-A002R30N