The BestLink SNMP/WEB Adapter is a network adapter for Uninterruptible Power systems that provides both SNMP and HTTP compatibility. This allows you to easily monitor, manage and, if necessary, safely shutdown remote UPS-protected servers, routers, hubs, and other key internetworking devices in a controlled manner. BestLink SNMP/WEB Adapters provide a self-contained link between the Best Power UPS and an Ethernet LAN/WAN, allowing your UPS to be remotely monitored and controlled from the next room, the next building, or the next state... with no additional overhead on any server. These dedicated adapters provide the essential network connection and pathway between UPS and any industry-standard network management platform or popular Web browser. BestLink also controls automatic shutdown of protected computer systems with the use of NetWatch client software (available beginning with Best Power's CheckUPS II CD-ROM v3.2).
BestLink SNMP/WEB Adapters expand your control and visibility throughout the network, and allow you to track power-related problems anywhere on the network. Along with managing the servers, routers, hubs, and other network devices, the UPS can also be monitored and controlled. The same network management software used to manage your other SNMP-compatible devices such as SunNet Manager, Novell Manage Wise, HP-OpenView, NetView 6000, and others, may be used to manage the UPS. And even if your protected device goes down, the UPS can still communicate with you via the BestLink SNMP/WEB Adapter. You may even be able to use the UPS to reboot the device.
Overview
The Eaton Environmental Monitoring Probe (EMP) enables you to remotely monitor environmental conditions as easily as you monitor power conditions. Using a standard Web browser, you can view the ambient temperature and humidity of the remote environment, as well as the status of two additional contact devices, such as a smoke detector or open-door sensor.
Compatibility
ConnectUPS-X 10/100Mb
ConnectUPS-BD
ConnectUPS-E with FW V3.01 and higher
Application/Usage
Data Center
Network Closet
Computer Room
Miscellaneous
Length: 2.26 inches
Monitors temperature, humidity, and status of two contacts/sensors
Works with any Eaton UPS with any ConnectUPS Web/SNMP card
Can be located up to 20 meters (65.6 feet) from the UPS
Measures ambient temperatures between -20 ºand 80 ºC and relative humidity between 10 and 90 percent
Displays status on Web page, IP phone or PDA, or network management system
Supports user-defined thresholds for temperature, humidity, and contact closure status and supports graceful shutdown of affected equipment
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
The Following Are Compatible With EATON 116750224-001