Bogen Communications WV100 Wall-Mounted 100W Amplifier

Bogen Communications WV100 Specifications

WV100 Wall-Mounted 100W Amplifier

Highlights

Product features: 100W, 150W, & 250W models; each with a large power reserve 8 module input bays, accepts up to 2 signal-processing output modules or up to 8 input modules Four priority levels 4-ohm, 8-ohm, 25V, & 70V outputs Wall-mountable with Back Box and Door (sold separately) Click below for module selection

Overview

See all products Bogen's Wall-Mount Power Vector modular amplifiers offer a wide range of power. The amplifier is designed to work with both high- (70/25V) and low- (4/8-ohm) impedance speaker systems. It includes eight module bays for plug-in input modules and allows for up to four levels of priority between modules. Two module bays are capable of accepting signal processing plug-in output modules. Each module is controlled by an independent volume control with an associated signal/clip LED for signal status. An 11-segment LED output meter monitors output signal level. It includes a motorized master volume control that can be controlled using a remote volume control panel (RVCP, sold separately).

Miscellaneous

Features: 11-segment LED output level meter monitors the output level of the power amplifier with Peak and Average meter switch Master mute function overrides all audio from the mixer section of the amplifier 2 module bays capable of handling signal processing plug-in output modules Each of the 8 module bays has an associated independent volume control Screw terminal for master mute and remote volume control functions Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads Two-color LED for each channel indicates input active/clipping Motorized master volume control can be remotely operated Requires front cover door (WMAD sold separately) Adjustable output level limiter with limit indicator Wide selection of advanced plug-in modules Bass and treble controls with center detent 4 levels of priority between modules 8 module bays