HomeIndexesAPCPTEL2

APC PTEL2 ProtectNet Standalone Surge Protector analog/DSL phone lines (2 lines, 4 w

APC PTEL2

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase at least $10,000 of APC Products.

ProtectNet

Manufacturer Part#  PTEL2

UPC Code: 731304000433

Provantage Code:  AMPO258

Condition:  Factory New

  • Product Type: Surge Suppressor/Protector
  • Limited Warranty: 10 Year
  • Product Family: ProtectNet
  • Maximum Surge Current: 200 A
  • Dataline Protection: Modem/Fax/DSL
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ComputingPower AccessoriesSurge Suppressors

APC PTEL2 Specifications

    PTEL2 ProtectNet Standalone Surge Protector analog/DSL phone lines (2 lines, 4 w


Summary

    Protects telephone equipment such as fax machines, modems, and answering machines.

    Lines Protected: 4 and 5, 3 and 6 on RJ-45/11 connector.

At a Glance

    • Catastrophic Event Protection - Basic Surge Protector components such as MOVs and Thermal fuses ensure instantaneous reaction to lightning strikes and wiring faults. If the surge components are damaged due to power spike or over voltage, excess power cannot reach your equipment. Unlike APC Surge Protector products, most surge suppressors continue to let power through even after circuits have been damaged, leaving your equipment exposed to other damaging surges.

Overview

    Data line surges make up an overwhelming majority of all surge induced damages where the equipment was thought to be already protected but had a back door such as a modem line unprotected. Network interface cards, in particular, can be destroyed by relatively mild spikes. According to Ethernet standards (IEEE 802.3), non-AC network electrical hazards include: Direct contact between components and power or lightning circuits, static charge buildup on cables and component, high-energy transients coupled onto the local cabling system (those induced by other cables which are installed in the general proximity of network cables or lightning within a mile radius) and potential differences (even from building to building, between safety grounds to which components are connected.)

Certifications & Standards

    • CSA
    • UL 497A
    • UL Listed

Miscellaneous

    • Catastrophic Event Protection
    • Standard Warranty: 10 Year Repair/Replace

System Requirements

    • Use only for analog modems, fax machines and other telecommunication devices
    • The PTEL2 must be connected to earth ground

Package Contents

    • ProtectNet Analog Telephone Line Surge Suppressor
    • User manual


Specifications

Product NamePTEL2 ProtectNet Standalone Surge Protector analog/DSL phone lines (2 lines, 4 w
Manufacturer Part NumberPTEL2
Product TypeSurge Suppressor/Protector
Product FamilyProtectNet
Dataline ProtectionModem/Fax/DSL
Environmentally FriendlyYes
Country of OriginCosta Rica
Height4.1"
Width1.9"
Depth1.1"
Product LineProtectNet
Limited Warranty10 Year
Maximum Operating Temperature113°F (45°C)
Maximum Surge Current200 A
Product ColorBeige
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following APC BIG DEAL qualifications:

Purchase at least $10,000 of APC Products.


Shop with confidence! Provantage is an authorized APC dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

APC
 
© Copyright 1984-2022 Provantage
APC ProtectNet PTEL2