YX012 Outside Grounding Kit for external antenna grounding. This is a safety item that should be used on all external mount antennas. Protects against electrical shorts or a nearby lighting strike. The antenna ground provides a lower path to a safe discharge point. Also grounding the antenna will "drain off" electrical noise leaving a cleaner signal....
YX023-PCS - Directional Signal Antenna Upgrade provides additional coverage by boosting the outside signal strength in the direction it is pointed. This antenna provides 12dBi of gain to strengthen the signal. - NOTE: This Product is an option for the zBoost YX500-PCS-1900MHz....
YX025-CEL - Yagi Directional Signal Antenna Upgrade provides additional coverage by boosting the outside signal strength in the direction it is pointed. This antenna provides 7dBi of gain to strengthen the signal. - NOTE: This Product is an option for the YX500-CEL-800MHz...
YX026-CEL - Yagi Directional Signal Antenna Upgrade provides additional coverage by boosting the outside signal strength in the direction it is pointed. This antenna provides 11dBi of gain to strengthen the signal. - NOTE: This Product is an option for the YX500-CEL-800MHz...
Provides additional inside coverage by boosting signal strength to cover larger living/working areas. - This Product is an option for the zBoost YX510 PCS-CEL Dual Band....
YX030-0W8 Window Entry Cable (8" long) Description: Allows you to pass the signal through a window frame. The connector ends are F(Female) to F(Female). - Note: You will need a second RG-6 cable with this accessory. One cable goes between the Base unit and this Window Entry Cable and the second cable would go between this Window Entry Cable and the Signal Antenna....
15' Extender Cable - Extend the length between the antenna and the base unit to 50 feet by adding a 15-foot extender cable. (Standard packages come with a 35-foot coaxial cable.) - NOTE: This Product is an option for the YX500-PCS-1900MHz....
35' ULTRA 3000MHz Extender Cable plus mating adaptor - Extend the run length between the Signal Antenna and the Base Unit with the lowest loss RG6 cable available (9dB/100ft @ PCS 1900MHz). Also includes a 2250MHz mating adapter to connect two cables together. Our cable is tested to 3000MHz and uses ULTRA grade connectors....
This cable is used in conjunction with the YX024-PCS 7dbI Directional Indoor Antenna. The cable goes between the Base Unit and the YX024-PCS antenna allowing the Base unit to be placed on the floor or in an overhead and the YX024-PCS be mounted at a desired height or position. This cable has low-loss and its connecting ends are TNC (Female) to TNC (Male)....