Tripp Lites N457-001-50, 50/125 micron, LC/ST, Male-to-Female Fiber adapter cable allows you to utilize older installed ST fiber cables when upgrading to newer switches using LC type SFP or GBIC transceivers. Simply plug the LC male end into the new switch, and plug your existing ST cables into the Female ST ends....

Tripp Lites N458-001-62, 62.5/125 micron, LC/SC, Male-to-Female Fiber adapter cable allows you to utilize older installed SC fiber cables when upgrading to newer switches using LC type SFP or GBIC transceivers. Simply plug the LC male end into the new switch, and plug your existing SC cables into the Female SC ends....

Tripp Lites N457-001-62, 62.5/125 micron, LC/ST Male-to-Female Fiber adapter cable allows you to utilize older installed ST fiber cables when upgrading to newer switches using LC type SFP or GBIC transceivers. Simply plug the LC male end into the new switch, and plug your existing ST cables into the Female ST ends....

Tripp Lites 1 foot DVI-D Male to DVI-I Female adapter cable is the ideal solution for those tight spaces where a standard straight DVI cable will not fit. The adapter also saves wear and tear on your video cards connector. This cable features Gold connectors and contacts, fully molded ends, and double-shielded cable....

Tripp Lite's 1 ft. DVI Monitor "Y" Splitter cable provides an inexpensive alternative for splitting the video signal from your PC's DVI port to two DVI enabled monitors. Tripp Lite Lifetime Warranty....

Tripp Lite's P120-001-2 DVI to 2 x VGA splitter allows you to attach two VGA enabled devices, such as monitors and projectors, to your computers DVI-I port. DVI-I is capable of outputting both Digital and Analog signals, so the splitter is perfect for connecting VGA LCD monitors, projectors, etc. (For splitting to two DVI enabled monitors, use Tripp Lite P564-001)....

Tripp Lite's 1 ft. gray category 5e (Cat5e) patch cable has 2 standard RJ45 molded male connectors featuring integral strain relief. The cable is manufactured from PVC 4-pair stranded UTP and is rated for 350MHz/1Gbps communication. Offered in a variety of lengths and colors for all category 5 (Cat5) and 5e cabling needs....

With Tripp Lite's new Category 6 snagless molded patch cables you can stay ahead of the game by distributing data, voice and video at higher speeds. These cables deliver stable performance up to 550MHz. Each comes UL verified and meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum....

Tripp Lite's HDMI v1.3 Active Extender Cable solves the problem of running HDMI cables longer than the maximum recommended distance of 5 meters. When used with Tripp Lite's P568-050 or P568-100 (50 ft. and 100 ft. HDMI cables) you're assured of a fully regenerated HDMI signal traveling the last 12 inches into your HDTV....

Tripp Lite's Power Splitter Cable - L6-30P male to 2 x L6-30R female. Constructed with 3 x 10ga copper conductors, fully molded ends and 250V/30A rating. Tripp Lite Lifetime Warranty....

Splitter Cable - Product Model: P039-001-2 - Voltage Rating: 220 V AC - Current Rating: 20A - Cord Length: 1 ft - Color: Black - Standard Warranty: Lifetime - -...

Free up twice as much space by plugging 2 cords into 1 outlet. Reduce the number of cords needed when traveling by powering two devices using one cable. Extend 2 cables up to 1-ft using the same outlet. Features two NEMA 5-15R receptacles with a NEMA 5-15P plug. Tripp Lite warrants this product to be free from defects in material and workmanship for life....

Attach this cord to an existing cable to extend it's length up to 1-ft. Features a NEMA 5-15R receptacle with a NEMA 5-15P plug. Tripp Lite warrants this product to be free from defects in material and workmanship for life....

Tripp Lite's 1-ft PS/2 Y Splitter allows both a keyboard and a mouse to be connected to the same PS/2 port and used simultaneously. Invaluable to any notebook/laptop user since most systems have only one PS/2 port. MiniDIN6 male to two MiniDIN6 female ports. Tripp Lite warrants this product to be free of defects in material and workmanship for life....

With Tripp Lite's new Category 6 snagless molded patch cables you can stay ahead of the game by distributing data, voice and video at higher speeds. These cables deliver stable performance up to 550MHz. Each comes UL verified and meets EIA/TIA Cat6 TIA/EIA-568-B-2.1 draft 9 standards. Constructed with high-quality copper wire and a staggered-pin plug design, near-end crosstalk levels are kept to a minimum....

Cable - Cable Length: 1ft - Color: Black - Features: Molded - Compatibility: - Headset - MP3 Player - Computer - Apple iPod Portable Media Player - - Conductor: Copper - Standard Warranty: Lifetime - -...

Tripp Lite's 1 ft. SXGA/UXGA Monitor "Y" Splitter cable provides an inexpensive alternative for splitting the video signal from your PC's VGA port to 2 High Resolution monitors that use standard 15-pin plugs. 75-ohm coax conductors used for RGBHV signals allow for use with monitors with up to 1600 x 1200 resolutions....

Meets category 6 cabling standards - Premium cabling for category 6, category 5e and category 5 applications - Length: 1 ft./Color: White/Connectors: RJ45 male - High-quality copper wire and a staggered-pin plug design to keep near-end crosstalk levels to a minimum - Feature molded connectors with integral strain relief...

Tripp Lite's high-speed 10Gbps CX4 Cables provide an ultra high-performance, cost-effective solution for Gigabit Copper applications. Featuring 28AWG Madison TurboTwin twinaxial cable, these cables utilize up to 3.125 gigabytes per second wire speed connections with four channels. Cables work with any...

Tripp Lite introduces it's new Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, LC/LC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost....

Tripp Lite introduces it's new Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/LC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost....

Tripp Lite introduces it's new Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, ST/LC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost....

Tripp Lite introduces it's new Laser-Optimized Multimode Fiber (LOMMF) "Aqua" cables, for use with 10Gb Ethernet applications. These new technology, 50/125um, SC/SC Fiber Optic cables, provide nearly three times the bandwidth over conventional 62.5um multimode fiber, with performance rivaling that of Singlemode cable, at a much reduced cost....

Tripp Lite's 1-meter multimode duplex fibre channel optic LC/LC patch cable is manufactured from 50/125 zipcord fiber. The cable has LC connectors on each end. It has a PVC jacket and is FDDI and OFNR rated. Duplex multimode fiber is most commonly used in fiber and fibre channel applications. It is backward compatible with 62.5 micron fiber and built-in headroom for future applications....