Terminal Server - Form Factor: External - Interfaces/Ports: 2 x DB-9 - 1 x RJ-45 - Data Transfer Rate: 10Mbps Ethernet - 115.2Kbps RS-232 Serial - Management: - HTTP - Telnet - Number of Ports: 2 - 1 - -...

Adds two 9-pin 16650 UART serial ports to PCI-equipped PCs - Each port is capable of a maximum data throughput rate up to 460.8 kbps - Each port includes integrated 32-byte FIFO buffers with software configurable Rx/Tx triggers, 4x clock, and on-board flow control to guarantee errorless data transmission even at top speed...

The Quattro 4 Port Serial Adapter offers an efficient way to utilize PCI slots and system resources while eliminating external cabling and power bricks. The Quattro-PCI Powered adds four 5/12 volt powered serial ports, while using only one system IRQ....

Connect and control any serial device via Ethernet (IP network), even remotely. LAVA ESL4-232-DB9 4-Port Device Server is all-purpose device server that allow you to network-enable any serial device, over any distance. Serial ports of ESL4-232-DB9 4-Port Device Server is enumerated as true native COM ports by Windows Device Manager....

The Lava Octopus-550 provides the easiest way to add eight 16550 UART serial ports to a PC system while using only one system IRQ! - This eight-port board is one of the most dependable multi-port serial boards around. It is an ideal communications solution in an ISP or remote access system environment....

This 2.5" (60 mm) high board is designed to fit compact chassis such as FlexATX motherboard systems, 2U rackmount systems, slimline systems, All-in-One systems, and compact POS systems. - The DSerial-PCI/LP is easy to use, and it uses the Moko S-1 ASIC, which virtually eliminates any possibility of component failure....

What better way to efficiently use system resources than Lava's two-port DSerial-PCI? The board provides the easiest way to double the number of 16550 UART serial ports in your system while using only one system IRQ. This "tried and true" board is one of the most reliable and flexible Plug and Play products on the market....

Adds two 25-pin Enhanced Parallel Ports (EPPs) to PCI-equipped PCs - Both ports use Lava's PCI Bus Enhanced Parallel Port technology up to 3 times faster than standard ISA and motherboard EPP parallel ports - Easy Plug and Play installation automatically selects next available IRQ and I/O addresses - Both ports share one IRQ saves valuable resources for other expansion cards...

Adds two 25-pin Enhanced Parallel Ports (EPPs) to PCI-equipped PCs - Easy Plug and Play installation- automatically selects next available IRQ and I/O addresses - Both ports share one IRQ-saves valuable resources for other expansion cards - Configurable for standard ISA parallel port addresses (0278 and 0378) for compatibility with legacy peripherals (e.g....

LAVA ESL2-232-DB9 Device Server provide serial ports that are network-enabled and simple to install, configure, and control. Any serial device can send its information to an Ether-Serial Link, which then places that information on the Ethernet. The serial ports of the LAVA ESL2-232-DB9 Device Server look and act precisely like they are built into your computer....

The LAVA DSerial 2 Port Powered Serial Adapter provides the easiest way to add two powered 16550 UART serial ports to your system while using only one system IRQ. This "tried and true" board is one of the most reliable and flexible Plug and Play products in the market....

The LavaPort-Quad combines the benefits of ultra high-speed 16650 UART technology with multi-port Plug and Play connectivity. Each of the four serial ports is capable of transfer rates of up to 460.8 kbps, yet all ports use only one automatically selectable system IRQ. - The LavaPort-Quad carries the...

The Quattro-PCI/LP is widely used for connecting various high-speed consumer peripherals to a PC. The fanout cable connection is popular with POS system manufacturers, while kiosk system builders find pin header connection better suited for in-the-kiosk computers....

One 2SP-ISA doubles your serial ports and adds a bi-directional parallel port in a system short on ISA slots. In addition to solving ISA real estate shortage, the board is ideal for systems where manual setting of IRQ and COM addresses is a must. The 2SP-PCI offers a generous selection of IRQ, COM, and LPT settings, to minimize the possibility of conflicts in resource allocation....

Easy to install and configure, Lava's SSerial-550 adds a high-speed serial port to any ISA-equipped PC. - The SSerial-550 is ideal for systems where manual setting of IRQ and COM addresses is a must. - The SSerial-550 offers a generous selection of IRQ and COM settings, to minimize the possibility of conflicts in resource allocation....

The LAVA DataTap-IP is a general purpose serial data line splitter with the added power of full data filtering. The device taps into any serial data stream to split and send serial data two ways: over IP, and additionally to a remote server, client, or COM port....

The 2.5" (60 mm) high board is designed to fit compact chassis such as FlexATX motherboard systems, 2U rackmount systems, slimline systems, All-in-One systems, and compact POS systems. - The Parallel-PCI/LP is fast, and it uses the Moko S-1 ASIC, which virtually eliminates any possibility of component failure....

The LAVA Parallel-PCI, when it came to market, was the first parallel PCI port card in the world. Fully PCI compliant, it takes advantage of the speed and easy configuration of the PCI bus. When it appeared, it almost tripled the speed benchmarks of ISA-bus parallel port cards, while offering greater flexibility for configuration....

What better way to efficiently use system resources than with the LAVA DSerial-PCI? This "tried and true" board provides the easiest way to double the number of 16550 UART serial ports in your system while using only one system IRQ. The LAVA DSerial-PCI is one of the most reliable and flexible Plug and Play products on the market....