This mixed-media network module has one full/half duplex, auto-sensing 10/100 Ethernet port and 2 WAN Interface Card (WIC) expansion slots, supporting all current WICs and VWICs. The 10/100 Ethernet connection is via an RJ-45 connector...

The Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter provids an extensible design that enables service prioritization for data, voice, and video services. Enterprises and service providers can take advantage of improved slot economics resulting from modular port adapters that are interchangeable across Cisco's routing platforms....

The VWIC2-1MFT-T1/E1 1-Port Multi flex Trunk Interface Card supports data and voice applications on the Cisco 1721 (data only), 1751 and 1760 Modular Access Routers, the Cisco 2600XM Multi service Router, the Cisco 2691 Multi service Platform, the Cisco 3662 Telco Versatile DCN Access Platform, the Cisco 3725 and 3745 Multi service Routers, and the Cisco 1841 (data only), 2801, 2811, 2821, 2851, 3825, and 3845 Integrated Services Routers....

The Cisco 1 port T1/E1 multiflex interface card support generic single-port T1 or E1 trunk interfaces for voice, data, and integrated voice and/or data applications. This card provide basic structured T1 service, as well as structured and unstructured E1 services....

The new ADSL HWIC provides 1-port ADSL connectivity to a WAN. This HWIC combined with the Cisco 1841 integrated service router (ISR), Cisco 1861 integrated service router, the Cisco 2800 and 3800 series integrated service router (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) and a central office....

The Cisco 2600 and 3600 Series with the ADSL WAN interface card (WIC) is the industry's first multi-service router to deliver business class broadband service with analog/digital voice integration, scalable performance, flexibility, and security for branch and regional offices....

Cisco's 1-Port Modem WAN Interface Card is now available for the award-winning Cisco 1800, 2600XM, 2691, 2800, 3700, and 3800 Series modular router platforms. The interface card provides cost-effective basic telephone service connectivity to allow remote router management, asynchronous dial-on-demand routing (DDR) and dial backup, dial- and fax-out modem access, and low-density remote-access- server (RAS) services....

The 155Mbps single port ATM OC-3 Multi-mode Network Module supports UNI mode ATM Adaptation Layer 5 (AAL5) for UBR, VBR-rt, VBR-nrt, UBR+ and ABR Classes of Service. This module will drive a signal to a maximum distance of 2 kilometers....

The 155Mbps single port ATM OC-3 Multi-mode Network Module supports UNI mode ATM Adaptation Layer 5 (AAL5) for UBR, VBR-rt, VBR-nrt, UBR+ and ABR Classes of Service. This module will drive a signal to a maximum distance of 2 kilometers....

The Cisco 1-Port Channelized OC-12/STM-4 SPA is available on high-end Cisco routing platforms offering the benefits of network scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the Cisco focus on investment protection along with consistent feature support, broad interface availability, and the latest technology....

1-Port Channelized OC-3 STM-1 ATM CEoP SPA must be installed in a Cisco 7600 SIP-400 SPA interface processor (SIP) before they can be used in the Cisco 7600 series router. A maximum of four CEoP SPAs can be installed in each SIP, and these SPAs can be different models. You can install the SPA in the SIP before or after you insert the SIP into the router chassis....

The Cisco 1-Port Channelized E1/T1/ISDN-PRI HWIC combine multiple T1/E1 WAN connectivity- Channelized T1/E1 and ISDN Primary Rate Interface (PRI), in the same card. Applications include fractional or full T1/E1 WAN connectivity, ISDN PRI for primary WAN link or WAN backup, and dial access aggregation....

Cisco 7200 VXR Routers - Cisco 7301 Routers - Product Type: Port Adapter - Interfaces/Ports Details: 1 x BNC T3/E3 WAN - Interfaces/Ports: 1 x T3/E3 WAN - Data Transfer Rate: 44.736Mbps T3 Full-duplex - 34.368Mbps E3 Full-duplex - Product Model: PA-T3/E3-EC - Number of Ports/Channels: 1 ...

The HWIC-CABLE-D-2 1-port DOCSIS 2.0-based cable HWIC provides lower total cost of ownership, advanced quality-of-service (QoS) enforcement, and advanced monitoring and load-balancing capabilities for customers by optionally integrating a DOCSIS 2.0-based cable modem within a Cisco Integrated Services Router (ISR) or Cisco IAD2430 Series Integrated Access Device....

A Solution for Adding Broadband or Perimeter LAN Connectivity to Your Network - The Cisco Single-Port Ethernet WAN Interface Card (WIC-1ENET) offers customers using a Cisco 1700 series router the option of an additional Ethernet port for enabling broadband Internet access or deployment of a perimeter LAN or demilitarized zone (DMZ)....

The 1-port Euro/J-DOCSIS 2.0-based cable HWIC provides lower total cost of ownership, advanced quality-of-service (QoS) enforcement, and advanced monitoring and load-balancing capabilities for customers by optionally integrating a DOCSIS 2.0-based cable modem within a Cisco Integrated Services Router (ISR) or Cisco IAD2430 Series Integrated Access Device....

Ideal for a wide range of LAN applications, the Fast Ethernet network modules support many internetworking features and standards. This single port network module offers 100BaseFX Ethernet....

The Cisco 1-port G.703 (E1) Voice/Wan Interface Card provide voice and data access to the public switched telephone network (PSTN). This multiflex trunk interface card is single-port trunk interfaces for voice, data, and integrated voice and/or data applications. This E1 multiflex VWIC with G.703 support allow unstructured E1 traffic that conforms to the ITU-T G.703 standard....

The WIC-1SHDSL-V3 interface card is a single port card. It supports all G.SHDSL features, and supply two twisted pairs of wires to implement 4-wire (two-line) G.SHDSL. This WIC support dying gasp and wetting current. It also provide a higher symmetrical bandwidth and longer reach than 2-wire G.SHDSL....

The single-port Cisco Gigabit Ethernet Network Module (part number NM-1GE) provides Gigabit Ethernet optical and copper connectivity for access routers. The module is supported by the Cisco 2691, Cisco 3660, Cisco 3725, and Cisco 3745 series routers. This network module has one gigabit interface converter (GBIC) slot to carry any standard copper or optical Cisco GBIC....

The single-port Cisco Gigabit Ethernet HWIC provides Gigabit Ethernet optical and copper connectivity in a compact form factor for all Cisco 2800 and 3800 series integrated services routers, except the 2801. - As an updated and enhanced version of the current WIC for the Cisco 2600 and 3700 chassis, the HWIC offers greater bandwidth and higher port density than the current WIC....

The Cisco 1-Port BRI U High-Speed WAN Interface Card offers BRI-U-based WAN connectivity for modularrouters deployed in small to medium-sized businesses (SMBs) and enterprise branch offices....