Allied Telesis AT-2916SX 32-bit Gigabit Fiber Adapter Card helps to boost your Fast Ethernet desktop throughput ten times to 1000Mbps. With the 1000Base-SX fiber-optic connection, data transmission is both secure and faster. In order to reduce CPU use, it uses the adaptive interrupts and ultra-deep 96-KB packet buffer....

Redundant Power Supply - Output Power: 80 W - Input Voltage: 220V AC - Compatibility: - MCR12 Chassis - Frequency: 50 Hz or 60 Hz - Input Voltage Range: 100V AC to 220V AC - Additional Information: - Load Rating: Small LAN / File server - -...

The AT-9924T delivers performance, flexibility, and reliability. Packaged in a 1RU standard rack mount chassis, all AT-9924T switch incorporates a switching core that yields wirespeed Layer 3 IPv4 routing, exceptional Quality of Service (QoS) features, and a robust hardware design with dual hot-swappable power supplies....

Data Transfer Cable - Cable Length: 3.28ft - Compatibility: Allied Telesis AT-SB x908 8 Slot Advanced Layer 3 Modular Switch - Conductor: Copper - Product Model: AT-HS-STK-CBL1.0 - -...

Allied Telesis AT X900-24XS - Allied Telesis AT X900-24XT - Allied Telesis AT X900-24XT-N - Product Type: Uplink Module - Expansion Slots: 1 x XFP Free - Data Transfer Rate: 10Gbps Gigabit Ethernet - Form Factor: Hot-swappable - Additional Information: - Huge capabilities and flexibility compressed into 1RU form factor...

The NEBS Compliant x900-24XT-N Layer 3 Switch is high-speed 60Gbps expansion bays which provide a high level of port flexibility and application versatility unmatched by any other 1RU Gigabit Ethernet switch on the market. The expansion modules can be used in a variety of configurations to provide tailored solutions that meet wide-ranging physical networking requirements....

The x900-48FE Layer 3 Switch offers performance, flexibility, and reliability, packaged in a compact 1RU standard rack mount chassis. The x900-48 is a highly featured access solution that incorporates a new generation switching core for wire-speed Layer 3 IPv4 and IPv6 routing, exceptional Quality of Service (QoS) features, and a robust hardware design with dual hot-swappable power supplies....

Power Distribution Chassis for up to 12 independently- operating unmanaged, standalone Media or Bridging Media Converters. May be either AC or DC powered, with optional redundant power supply. Desktop or 19" rack mount installation....

Redundant Power Supply - Compatibility: Allied Telesis AT-CV1200 2-Slot Standalone Chassis - Additional Information: Optional second redundant power Supply - -...

When upgrading your traditional 10Mbps Ethernet network or extending your 100Mbps Fast Ethernet network, switches are required and the AT-FS232 provides an ideal solution. The AT-FS232 is designed to extend the distance of your network by converting Fast Ethernet data between twisted pair cabling and single-mode fiber optic cabling.The ATFS232 features a 100FX fiber port and a 10/100TX twisted pair port.The fiber optic port has an SC connector and an operating distance of 15 kilometers .The twisted pair port has an RJ-45 connector with a maximum operating distance of 100 meters (328 feet)....

Media Converter - Form Factor: Rack-mountable - Wall-mountable - Product Model: AT-MC605 - Interfaces/Ports: 1 x RJ-45 - 1 x RJ-11 - 1 x RJ-11 Phone Line - Dimensions: 0.98" Height x 3.74" Width x 4.29" Depth - Number of Ports: 3 - Network Technology: 10/100Base-TX - VDSL - Compatibility: AT-MCR12 Chassis ...

The AT-MCF2000M is the management module for the AT-MCF2000 two-slot chassis. With the AT-MCF2000M management module, if there is a blade failure, insertion or removal, your traffic flow will not be interupted....

The AT-MCF2000S is the slave module for the AT-MCF2000 two-slot chassis and AT-MCF2300 four-slot chassis. Used in conjunction with the AT-MCF2000M Management module, multiple chassis can be controlled and managed as a single IP entity....

More Bandwidth with PCI-express Interface: - The PCI-express (PCI-e) design gives you the maximum possible bandwidth and bus efficiency. Other benefits are capability and low power consumption.Dual Port Fiber Interfaces: - Two fiber port interfaces (LC connectors) give you maximum protection against failure....

AT-2972SX single-port fiber gigabit PCI Express card with fiber LC connector is ideally suited to server-based applications as well as to client computers that require very high throughput. It includes support for Preboot eXecution Environment (PXE) and Wake-on-LAN. Using these procedures, computers...

Fiber Optic Fast Ethernet Card - Product Model: AT 2711FX/MT - Interfaces/Ports: 1 x MT-RJ - Host Interface: PCI Express x1 - Form Factor: Internal - Dimensions: 2.2" Height x 4.72" Width x 2.2" Depth - Network Technology: 100Base-FX - Number of Ports: 1 - Compatibility: - Linux 2.4 or later...

AT-2711FX Fast Ethernet Fiber Network Interface Card design gives you the maxim possible bandwidth and bus efficiency, other benefits are: capability and Low Power Consumption. For the current customers who are using Allied Telesis 100Mbps Fiber cards (AT-2701FX), and want to upgrade their systems to PCI-Express, AT-2711FX Fast Ethernet Fiber Network Interface Card is the ultimate solution.The customers can continue using their existing 100Mbps Fiber network without adding any more new equipment....

The AT-2750FX secure interface card hardens at-risk systems without impacting performance. It features an embedded security processor to offload encryption, authentication, and other cycle-intensive tasks from the host CPU, resulting in optimal system and application response. The types of encryption supported are DES, 3DES, FIPS capable and AES....

The AT-2750FX secure interface card hardens at-risk systems without impacting performance. It features an embedded security processor to offload encryption, authentication, and other cycle-intensive tasks from the host CPU, resulting in optimal system and application response. The types of encryption supported are DES, 3DES, FIPS capable and AES....

The AT-2750FX secure interface card hardens at-risk systems without impacting performance. It features an embedded security processor to offload encryption, authentication, and other cycle-intensive tasks from the host CPU, resulting in optimal system and application response. The types of encryption supported are DES, 3DES, FIPS capable and AES....

The AT-2750TX secure interface card hardens at-risk systems without impacting performance. It features an embedded security processor to offload encryption, authentication, and other cycle-intensive tasks from the host CPU, resulting in optimal system and application response. The types of encryption supported are DES, 3DES, FIPS capable and AES....

The AT-2746FX is resistant to signal degradation, snooping and interference, and ideal for networks that require protection from electrical interference or where security is a concern....

The AT-2746FX is resistant to signal degradation, snooping and interference, and ideal for networks that require protection from electrical interference or where security is a concern....