AT-CM3KOS Gigabit Ethernet Media Converter is rate converter line card features a 10/100/1000BaseT twisted pair port and an optical SFP port. The twisted pair has an RJ-45 connector and a maximum operating distance of 100 meters (328 feet) when connected to an Ethernet or Fast Ethernet or Gigabit Ethernet device....

The AT-CM2K0S Converteon Blade is designed to extend the distance of your network by interconnecting LAN devices that are physically separated by large distances. These bridging converters have the functionality to connect any managed/unmanaged 10Mbps, 100Mbps, or 1000Mbps (1Gbps) switch or hub using...

Media Converter - Form Factor: Internal - Product Model: AT-CM302 - Interfaces/Ports: 1 x RJ-45 - 1 x SC Duplex - Dimensions: 5.1" Height x 0.86" Width x 2.89" Depth - Number of Ports: 2 - Network Technology: 10/100Base-TX - 100Base-FX - Management: - IEEE 802.1q VLAN - Remote Management ...

Media Converter - Dimensions: 0.86" Height x 0.86" Width x 5.1" Depth - Compatibility: Converteon Media Converter chassis - Product Line: Converteon - Distance Support: 2km - Maximum Distance Support: 2km - -...

The 1000X SFP Converteon Line Card is designed to extend the distance of your Gigabit network by interconnecting LAN devices that are physically separated by large distances. The cards are compatible with a wide range of SFP modules, providing fiber connectivity over both multi mode and single mode fiber, at distances up to 80km, and copper connectivity up to 100m....

The AT-CM70S T1/E1 Media Converter line card is designed to increase the capacity of an existing point-to-point fiber network, by multiplexing up to 4 T1/E1 TDM channels and one Fast Ethernet channel over a single fiber interface. By the use of a modular fiber SFP (Mini-GBIC) uplink, installers can easily deploy the AT-CM70S over a wide range of fiber optics, including multi-mode, single-mode and bi-directional fiber at distances up to 40km....

The AT-PWR9 is designed to provide redundant DC power. When installed, the power supply shares the load of powering the chassis with the main power supply....

Redundant Power Supply - Form Factor: Plug-in Module - Input Voltage: 110V AC - 220V AC - Compatibility: Allied Telesis SwitchBlade X908 Advanced Layer 3 Modular Switches - Input Voltage Range: 100V AC to 240V AC - -...

Redundant Power Supply - Compatibility: Allied Telesis x900 Series Layer 3 Advanced IPv4 and IPv6 Switch - -...

AR020 E1/T1 PRI port (1) - Optional port Interface card (PIC)...

Allied Telesis AT AR720 - Product Type: Security Module - Additional Information: Provides DES and 3DES based encryption - -...

10T (RJ45) to AUI Micro Transceiver - Metal-cased, with slide latch - Slim-line versions (AT-MX10S,AT-210TS) for improved mechanical fit for Macintosh, Sun SPARC stations and IBMRS/6000 workstations. - For complete product details, including specs Click Here....

The AT-2701FX 100Mbps fast Ethernet fiber network Interface card (NIC) is ideal for security conscious fiber-to-the-desk applications, and PCs equipped with small desktop solutions....

Providing powerful 10/100 switching solutions for desktop and small network environments, the Allied Telesyn AT-FS705LE-50 unmanaged switch features full auto-negotiating 10/100 ports. These ports enable the switches to detect the speed and duplex modes of attached devices, enabling them to automatically configure for the best possible performance....

The Allied Telesyn AT-FS705LE unmanaged switch provides powerful 10/100 switching solutions to desktop and small network environments. The switch features full auto-negotiating 10/100 ports which automatically detect speed and duplex modes of attached devices and allow the switch to automatically configure for the best possible performance....

Fast Ethernet Switch (AT-8012M) - Fast Ethernet Switch (AT-8016F) - Fast Ethernet Switch (AT-8024) - Fast Ethernet Switch (AT-8024GB) - Fast Ethernet Switch (AT-8024M) - Fast Ethernet Switch (AT-8026FC) - Product Type: Expansion Module - Interfaces/Ports Details: 1 x RJ-45 10/100/1000Base-T LAN ...

This expansion module provide optional uplink ports for the 8000 series, 8500 series and 8600 series. It is designed for the one or two expansion slots on the front of the 10/100 switches. It offers flexibility in building or expanding your network....

The AT-AR415S is a secure modular router offering performance, flexibility and security for small to medium-sized business. Packaged in a compact one-rack unit chassis, this versatile router provides five 10/100 Fast Ethernet interfaces and supports a variety of Port Interface Cards (PICs)....

The adapter connects a PCI compliant server or workstation to a Gigabit Ethernet network. The adapter incorporates a technology that transfers data at a maximum rate of 2Gbps - 20 times the rate of Fast Ethernet adapters. In addition, the adapters use fiber optic cabling and a connector that meets 62....