Viking Electronics Hot-Line Stainless Steel Panel Phone Armored Cable Keyp

Viking Electronics K-1900-8 Specifications

Hot-Line Stainless Steel Panel Phone Armored Cable Keyp

Overview

The K-1900-8 panel phone can either auto-dial a phone number each time the handset is lifted, be used as a multi-number auto-dialer, or be used as a standard (dumb) phone. The unit will Touch Tone or pulse dial and will not auto-dial on incoming calls. The K-1900-8 housing consists of a heavy gauge stainless steel panel, a metal Touch Tone keypad, an armored cable, a heavy duty handset, and an all metal cradle. The K-1900-8 can be easily Touch Tone programmed at the shop or installation site. All programming is stored in non-volatile memory.

Compatibility

See all products Viking Outdoor Enclosure: VE-9X20Y VE-9X20R VE-5X10 Viking Telephone Panel: K-1500-7 K-1900-7

Miscellaneous

Auto dials 1 (up to 32 digits) programmable speed dial number Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers Touch Tone or pulse dialing Touch Tone keypad Non-volatile memory (no batteries required) Operates on analog PABX and key system extensions or analog Centrex and C.O. Lines Programmable 6 digit security code Touch Tone programmable Vandal Resistant Features: 1/8" thick stainless steel panel, armored cable, metal cradle and sealed metal keypad Blocks fraudulent calls from hand held pocket dialers Limited toll restriction in dumb phone mode