Tripp Lite Top Of Rack A/C Unit 12K Btu 208/240V 9U

Tripp Lite SRCOOL3KTP Specifications

Top Of Rack A/C Unit 12K Btu 208/240V 9U

Highlights

Tripp Lites SRCOOL33K is a computer room air conditioner meant for general computer room area cooling or supplemental cooling for large server rooms. The SRCOOL33K uses a new compressor technology that drastically cuts the energy consumption over a standard air conditioning model. It uses an inverter driven DC (direct current) variable speed compressor. A typical air conditioner uses an AC (alternating current) compressor that is either 100% on or 100% off. Each time the compressor turns on there are enormous in-rush current spikes. The unit runs for several minutes to cool the space then turns completely off. This start/stop sequence is not the most efficient way of running. Tripp Lite uses the inverter driven, variable speed, DC compressor technology. During start-up the SRCOOL33K has a slow-start feature that spools the compressor up slowly. This prevents the high in-rush current spike seen in AC driven compressors. Another feature is that it doesnt need to run full on, then full off. The SRCOOL33K starts off at approximately 25% of its max cooling capacity. After two minutes, based on temperature and airflow readings, the unit steps up to 50% of max capacity. After an additional 2 minutes,if the current cooling capacity its running at is not sufficient, it increases again to 75% of max capacity. It will continue to increase to 100% of max cooling capacity after another two minutes if needed At any one of these first three steps (25%, 50%, or 75%) if the environment can sufficiently be cooled at a given step level, the unit will not go up to the next highest level. This way you are only running the unit as high as needed without overkill (like a typical AC compressor thats at 100% all the time when on.) Once the room starts cooling from these step levels the unit, again from temperature and pressure readings, starts to throttle down to a lower level. It chooses this level and constantly adjusts to simply maintain the cool in the room. Again, no start and stop like typical units. Just a slow steady cruise control rate to maintain the room environment.

At a Glance

12,000 BTU (3.5kW) cooling capacity protects rack equipment against overheating Top-of-rack mounting saves floor space and allows cold air to flow naturally downward Built-in LX Platform interface allows full remote monitoring and control 24/7 Included 7 in. color touchscreen LCD provides real-time settings and diagnostics Self-contained design for easy setup, avoiding costly plumbing or HVAC expenses

Overview

12,000 BTU Cooling Capacity Protects Your Equipment and Prevents Expensive Downtime This SmartRack® precision air conditioning system delivers 3.5kW (12,000 BTU) of cooling to your rack equipment to help prevent sudden shutdowns, malfunctions and other failures caused by overheating or fluctuating temperatures. It is ideal for tight-fitting edge micro data centers and other mission-critical IT applications, including retail and commercial outlets (storefronts and branch offices), light industrial environments (factories and warehouses) and research/ development locations (laboratories and workshops). Convenient Space-Saving Design The SRCOOL3KTP micro data center cooling unit mounts on top of your rack enclosure to save valuable rack space and floor space. Top installation allows cold air to flow downward and heat to rise naturally. The self-contained close-coupled SRCOOL3KTP is designed to work in conjunction with Tripp Lite's SR25UBAC and SR33UBAC rack cabinets (sold separately), but you can use it with most SmartRack enclosures 33U or lower to deliver precision cooling to installed equipment. The low-maintenance unit requires no HVAC specialist to install. Rack AC Unit Focuses Cold Air Where It's Most Needed The SRCOOL3KTP uses environmentally friendly R410A refrigerant to focus cold air directly into the rack to efficiently cool equipment. Variable fan speed adjusts the cooling output to the need of the IT load to prevent on/off cycling and large temperature swings. An included color touchscreen LCD allows convenient status monitoring and diagnostics right at your fingertips. Built-In Evaporator Expels the Condensed Water Through the Exhaust Duct The evaporator expels water through the exhaust duct, which means no costly plumbing connections or water tanks to empty. No external condenser or refrigerant piping is required for operation. Internal leak detection automatically turns off the cooling system to prevent condensate from entering the rack. Commercial-Grade Components for Reliable Performance With a 100-percent duty cycle, the SRCOOL3KTP can run continuously without costly downtime. It uses copper tubing that is stronger than the aluminum tubing used in most consumer cooling units. The copper allows higher pressures and better weld joints to stand up to the constant vibration of the running compressor. LX Platform Remote Network Interface Offers 24/7 Monitoring and Control The built-in LX Platform's PowerAlert® Device Manager allows round-the-clock management of the SRCOOL3KTP. You can configure settings, events and actions, as well as power the unit on and off or graph temperatures over time without being on site. You can also receive configurable alarm notifications via email, SMS or SMNP. The SRCOOL3KTP will restart automatically after a power failure.

Package Contents

SRCOOL3KTP Top-of-Rack Precision Cooling Air Conditioner Touchscreen LCD and Necessary Cabling Rack-mounting Hardware Owner's Manual

Additional Product Images

See all products