Contact us and save even more if you meet these Big Deal qualifications.Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
Tripp Lite's 120V 20A metered PDU system with Automatic Transfer Switching (ATS) is a 16 outlet PDU with a digital display to indicate total PDU power consumption in amps. Outlets are sequentially turned-on at 250 millisecond intervals when the PDU is first energized from an unpowered state to prevent inrush-related equipment interaction on startup. Supports 1U rackmount installation in a 2 or 4 post rack. Included are 16 NEMA 5-15/20R outlets, and two 12 ft. L5-20P input power cords. Each cord is compatible with both NEMA 5-20R and L5-20R receptacles.
Optional integrated ATS is available for use when two separately derived input power sources are available. The attached power cord serves as the primary AC input cable, while the included detachable power cord serves as the optional-use secondary AC input connection. The PDU system passes the primary input power through to connected equipment whenever line voltage and frequency levels are normal. If the primary input source goes outside of these tolerances or fails altogether, the ATS will automatically switch all PDU output to the secondary line sourced input power (when available) to maintain continuous operation of connected loads without reboots or service interruptions. Once the primary power source is restored, the PDU will automatically switch back to primary sourced input power. The dual input cabling can be configured for UPS maintenance bypass of standard UPS systems or to create a redundant dual-UPS power source for a critical, single-corded network device.
120V 20A metered PDU system with Automatic Transfer Switch (ATS)
Dual input cords, one attached (primary) and one optional-use detachable cord (secondary)
Included cordsets support 5-20P and L5-20P plug-in connections via secure adapters
Front panel digital ammeter displays power consumption in amps
16 built-in NEMA 5-15/20R output receptacles
Optional ATS function enables setup for hot-swappable UPS maintenance bypass, dual UPS protection or dual AC input redundancy for critical single-corded network hardware
Small 1U rackmount format installs in only one rack space with a maximum installed depth of 14.5 inches
In the box
PDU with attached L5-20P input power cord
Detachable C19 to NEMA L5-20P 12 ft / 3.6m power cord for optional secondary input
Two NEMA L5-20R to NEMA 5-20P plug adapters
User manual with warranty information
At a Glance
Single phase 20A 120V Auto Transfer Switch / ATS PDU
Enables redundant A/B power option for single-corded network devices
Separate primary & secondary inputs connect to any two compatible power sources
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
Management
Optional Automatic Transfer Switch (ATS) function enables setup for hot-swappable UPS maintenance bypass
Dual UPS protection or dual AC input redundancy for critical single-corded network hardware
Slot for optional SNMPWEBCARD accessory to enable remote individual outlet control over IP
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
Shop with confidence! Provantage is an authorized Tripp Lite dealer.