Tripp Lite SmartPro 750VA USB 120V 5-15P Line-Int 8-Out Tel 10BT DB9 Slot

Tripp Lite SMART750SLT Specifications

SmartPro 750VA USB 120V 5-15P Line-Int 8-Out Tel 10BT DB9 Slot

Highlights

Rear View USB personal computers have exploded onto the marketplace, and Tripp Lite has responded with power protection designed specifically for the USB interface. USB connectivity, automatic voltage regulation, reliable battery backup, premium surge suppression and unattended shutdown software.

General Information

Right View Tripp Lite's SmartPro USB line also includes built-in RJ11 jacks for modem/fax line protection. A unique split-outlet design offers 6 outlets, 3 with battery backup and surge protection and 3 with surge-only protection. This intelligent design allows users to connect not only a CPU, monitor and modem, but also heavy draw peripherals such as printers and scanners.

Summary

See all products Tripp Lite's SMART750SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 23 minutes half load runtime and 9 minutes fully loaded. 750VA / 500 watt power handling capability and full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes 8 protected NEMA 5-15R output receptacles total, 4 of which offer surge suppression-only for less critical desktop accessories. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Optional SNMPWEBCARD accessory enables remote monitoring of UPS as a managed device via network management console applications. Communications interfaces support messaging of UPS and line power status, plus output power control for scheduled or immediate reboot of all connected devices at once. Includes PowerAlert UPS monitoring and unattended shutdown software with management support for an unlimited number of network UPS systems. Free PowerAlert enterprise managment software is also available for select opportunities. Built-in audible alarm and 10 LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost and trim operational status information. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Also includes single line TEL / DSL or ethernet line surge suppression. Attractive, all-black tower housing. Two year warranty with $250,000 Ultimate Lifetime Insurance.

Details

Features Include SMART750SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 750VA / 500 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 23 minutes at half load (375VA / 250 watts) and 9 minutes at full load (750VA / 500 watts) Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110 or 120V nominal output over an input voltage range of 83 to 145V Includes 8 NEMA 5-15R output receptacles total, 4 with UPS and surge suppression for critical devices and 4 with surge-only protection for less critical accessories PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 10 LEDs offer continuous status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed 2 year warranty with up to $250,000 connected equipment insurance In the box SMART750SLT UPS system PowerAlert Software CD-Rom USB and serial cabling User manual with warranty information

At a Glance

750VA line interactive tower UPS; Sine wave output 100/110/120V nominal output during brownouts and overvoltages USB, RS232 and optional SNMP/Web card are available for simultaneous use Detailed status LEDs; Single line TEL / DSL surge suppression NEMA 5-15P input; 8 NEMA 5-15R outlets

Overview

Tripp Lite's SMART750SLT intelligent, line-interactive sine wave UPS system protects servers, networking accessories and telecommunications equipment from blackouts, voltage fluctuations and transient surges. Large internal batteries offer 15 minutes half load runtime and 5 minutes fully loaded. 750VA/500 watt power handling capability and full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic applications. Includes 8 protected NEMA 5-15R output receptacles total, 4 of which offer surge suppression-only for less critical desktop accessories. Supports simultaneous remote monitoring of UPS and site power conditions via built-in network accessory card slot, USB and DB9 serial monitoring ports. Communications interfaces support messaging of UPS and line power status, plus output power control for delayed or immediate reboot of all connected devices at once. PowerAlert UPS monitoring software is available via free download. Built-in audible alarm and LEDs offer status notification for line power, battery power, battery charge level, load level, plus AVR boost and trim operational status information. Network grade AC surge suppression protects equipment from damage and performance problems resulting from transient surges. Also includes single line TEL/DSL or Ethernet line surge suppression. Attractive, all-black tower housing. More from the Manufacturer

Application/Usage

Network Telecommunication

Certifications & Standards

UL1778 (USA), cUL (Canada), Class B (emissions), RoHS-Compliant, FCC Part 68 / Industry Canada (telecommunications)

Miscellaneous

Ideal for the protection of network fileservers, internetworking gear, switches, hubs, POS terminals, VOIP telephony and traditional PBX switching systems, back office computer systems, ATM machines, informational/ internet/commerce kiosks, remote unattended servers, web servers, database servers, security systems, card readers, security cameras and other sensitive electronic devices requiring clean, continuously- regulated output power Switches: Includes 2 front panel mounted switches; power on switch and power off switch Low voltage transfer to battery power: Switches to battery power as line voltage decreases to 83 volts or less High voltage transfer to battery power: Switches to battery power as line voltage increases to 145 volts or higher