Tripp Lite 4000W 48V Inverter Charger ATS Sine Wave 220V/230V/240V 1A/70A
Click image to enlarge or see more views.
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
4000W 48V Inverter Charger ATS Sine Wave 220V/230V/240V 1A/70A
Summary
Features Include
Functions as an extended-run UPS, power source and inverter
Provides up to 4000 watts of pure sine wave output
Can be configured for both single- and 3-phase operation for high-capacity industrial and commercial installations
Configure up to 7 units in parallel for increased capacity up to 28 kW
Optional wired remote provides control from up to 32 ft.(9.7 m) away
220,230 or 240V selectable AC input & output from any 48V DC battery or automotive DC source
Double Boost output supports momentary start-up loads up to 200% of the continuous rating for up to 10 seconds(see specification chart) - OverPower output supports longer duration overloads to 150% for up to 60 seconds
3-stage, selectable 1/70 amp battery charger with adjustable settings for wet/gel battery types
LCD display and 4 membrane selector buttons allow user to configure operation
Automatic overload and thermal(overheating) shutoff
Front panel remote control connector enables remote off/on switching( APSRMSW sold separately
Load sensing control dial enables adjustable load threshold required to automatically turn the inverter on and off in DC mode as load conditions change
Remote battery temperature sensing connection function prolongs battery life by adjusting the charge float voltage level based on battery temperature
At a Glance
Delivers pure sine-wave AC power from AC or DC source
Continuous 220/230/240V selectable AC input/output
Operates in single- or 3-phase mode
4000W continuous output power; 8000W peak power
Auto-transfer switching option for UPS operation
Overview
The APSX4048SW PowerVerter® APS X Series 4000W Inverter/Charger with automatic line-to-battery transfer and integrated charging system serves as an extended run UPS, a standalone power source and an automotive inverter. It provides up to 4000 watts of pure sine wave power to connected equipment, helping it perform better and last longer. The unit can be operated in single-phase mode and an extremely efficient 3-phase mode suited for high-capacity industrial and commercial installations. For increased capacity, up to seven total APSX4048SW units can be configured in a parallel connection for increased capacity up to 28 kW.
Supplies up to 4000 watts of continuous 220,230 or 240V selectable AC input & output from any 48V DC battery or automotive DC source; 50/60 Hz pure sine wave output(hardwired). When hardwire AC input is energized, commercial power passes through to connected equipment and the battery set is recharged via 3 stage, 1/70 amp charging system. In UPS mode, the APS system responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to battery-derived AC output. Includes a set of high current DC input terminals for simple installation(user supplies batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power during battery charging and UPS line power operation, and sine wave AC output in inverter and UPS backup modes. Built-in Automatic Voltage Regulation(AVR) corrects line power AC brownouts and overvoltages without using battery power during battery charging and UPS standby modes. Reliable large transformer design, with frequency control powers resistive electronic loads or large inductive motors, compressors and other items with high current needs on startup. Optional APSRMSW wired remote power switch with full status LEDs provides remote power inverter on/off switching and continuous status information(part# APSRMSW sold separately). Supports an unlimited amount of runtime with any number of user-supplied batteries connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for wet/gel battery types and selectable line to battery power transfer voltages.
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.