IEEE 802.3at PoE+ to supply 30 Watts on 10/100/1000Base-T port
Supports IEEE 802.3af
Supports dual speed for SFP slot
Non-blocking architecture
Compact size
IP31 housing protection
Link Pass Through
Extended operating temperature (-40°C to 75°C)
DIN Rail mount / optional wall mount brackets included
Full/half-duplex flow control
Auto-MDI/MDIX
Auto-Negotiation
Store-and-forward transmission
10K byte jumbo frames
Overview
SI-IES-111D-LRT has one SFP slot and one RJ45 port. The RJ45 port supports 802.3at (PoE+), and can provide 30W for high powered application. The SFP slot provides more flexibility when planning and implementing the network. The slot can accept either a 100m or 1000m SFP module. This makes it possible to easily change the transmission mode and distance of the connection by using a different module. The SFP module is hot-swappable, and there is a dip switch to adjust the LFP function.
The SI-IES-111D-LRT is a (2) port unmanaged hardened PoE+ injector that adds up to 30 Watts of power from it's PoE+ Port onto a network segment. The gigabit speed SFP slot provides the ultimate flexibility by allowing fiber SFP uplink ports with varying communication distances.
Certifications & Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 802.3at
IEEE 802.3z
IEEE 802.3af
Safety: UL508, Class 1
Division 2, Groups A, B, C, and D Hazardous Locations
1 x 10/100/1000Base-T PoE+ RJ-45 Ethernet 30 Watts
1 x 10/100/1000Base-T
Input Voltage
57 V DC
48 V DC
Environmentally Friendly
Yes
Height
4.3"
Width
1.4"
Depth
3.7"
Input Ports
1 x 100/1000Base-X SFP Ethernet
1 x Ethernet
Product Model
SI-IES-111D-LRT
Protection Type
ESD Protection
Surge Protection
Limited Warranty
Lifetime
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Supplies/Accessories for Transition Networks SI-IES-111D-LRT