Server Technology C2SG36TE-DFME2M66 Specifications | | Smart Pops Master PRO2 (36) Configurable Alt Phase Hdot Outlets, 208V 3PH DELTA6BR 50A CS8365 3M/10FT Cord, Auto-Orient Mid Display, Bottom Base Cord Entry, Doghouse Breakers, Phase Monitoring, WXD = 2.20IN x 2.50IN
|
At a Glance- HDOT Cx Outlets: Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs.
- Network Monitoring: Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.
- Hot-Swap Network Card: Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit.
- Star Multi-Linking: PRO2 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card.
- Temperature/Humidity Monitoring: Primary and Expansion (select products) units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.
- IP Access, Security & Communications: Web, SSH, Telnet, SNMPv2c & v3, RS-232 serial, 10/100 Base T-Ethernet, LDAP(S), TACACS+, RADIUS, DHCP, & SMTP/email.
- Auto-Flip Current Display: Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets.
- Per- Inlet Power Sensing: PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet.
- Branch Current Monitoring: Monitors current at each breaker branch and provides SNMP-based alerts and emails on high usage that risks a tripped circuit.
- Branch Circuit Protection: This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic-hydraulic circuit breakers or UL 248 fuses.
- HDOT (High Density Outlet Technology): The highest outlet density available in a network connected PDU. Meets IEC C13 and C19 specifications, plus high native retention, and UL94V-0 flame rating.
- High Temperature Rating: This product has been tested and approved for safe and reliable operation in 65 °C data center environments.
- Power Pivot: The 90-degree rotatable power cord allows for standardized deployment at any facility no matter where power must be routed.
- Flexible Mounting: Includes standard button mounts along with provisions for custom mounting brackets.
- Color-Coded Options: Select from six colors to designate PDU circuits in the data center - black, white, red, green, blue, and yellow.
|
OverviewThe Server Technology® PRO2 Smart PDU provides local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Smart "Primary" PDU can be connected to as many as three (with optional module) PRO2 Smart "Link" PDU to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration. |
Application/UsageIT Equipment Data Center Server Rack/Cabinet |
Management- HTTP/HTTPS
- TLSv1.2
- SSHv2
- Telnet
- SNMPv2c
- v3 (GET, SET, Traps)
- IPv4 and IPv6
- LDAPv3/LDAPS
- TACACS+
- RADIUS
- FTP/SFTP
- RS-232
|
Certifications & StandardsSafety (Listed & Certified, cTUVus mark): - UL 62368-1
- CSA C22.2 No. 62368-1
EMC: - FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A
- CANICES-003, Class A
|
Package Contents- PRO2 Smart 36-Outlets PDU
- Standard Button Mounts
|
Product Name | Smart Pops Master PRO2 (36) Configurable Alt Phase Hdot Outlets, 208V 3PH |
Manufacturer Part Number | C2SG36TE-DFME2M66 |
Product Type | PDU |
Phase | Three Phase |
Receptacle Type | IEC 60320 C13 CX |
Product Family | PRO2 Smart |
PDU Type | Monitored |
Power Rating (Watt) | 14.40 kW |
Receptacle Detail | 24 x IEC 60320 C13 12 x CX |
Plug / Connector Type | CS8365 3P+G 50A |
Features | LED Display |
Input Current | 50 A |
Mount Type | Rack-mountable Cabinet-mountable Button Mount |
Protection Type | Branch Circuit Circuit Protection Fuse Double Pole |
Input Voltage | 230 V AC |
Output Voltage | 208 V AC |
Input Frequency | 60 Hz |
Minimum Operating Temperature | 32°F (0°C) |
Maximum Operating Temperature | 140°F (60°C) |
Minimum Storage Temperature | -40°F (-40°C) |
Maximum Storage Temperature | 185°F (85°C) |
Network (RJ-45) | Yes |
Minimum Operating Humidity | 8% |
Maximum Operating Humidity | 90% |
Height | 70" |
Width | 2.2" |
Depth | 2.5" |
Product Series | Smart |
Product Line | PRO2 |
Limited Warranty | 2 Year |
Circuit Breaker | Yes |
|
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
|