Raritan 208V 30A 12XC13 24XCX L6-30P Switched PRO4X Outlet #1 Opp Input

Raritan C4W36RA-2CBE2FE2 Specifications

208V 30A 12XC13 24XCX L6-30P Switched PRO4X Outlet #1 Opp Input

At a Glance

See all products HDOT CX OUTLETS: Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs. 45 DEGREE ANGLED INFEED: The angled infeed improves accessibility, provides infeed strain relief, and its bend radius is suitable with 60A rated cords. NETWORK MONITORING: Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. MULTI-UNIT LINKING & CASCADING: Daisy chain up to 16 PDUs from a primary PDU using a USB or Ethernet connection through a single IP address. MULTI-COLOR LCD: An easy-to-read LCD provides a local indication of power usage, alerts, and alarms. HOT SWAPPABLE CONTROLLER: The Controller is the PDU's center of intelligence and houses computing, display, and connectivity ports. POWER QUALITY MEASUREMENTS: Monitor and alert on the power being fed to the PDU for harmonics, voltage dips and swells, crest factor, and more at the outlet or load. RGB LED OUTLET INDICATORS: RGB LEDs identify an outlet's on/off state, if it's above/below a certain power threshold, or if it's in suspect of a power measurement irregularity. WAVEFORM CAPTURE: Capture voltage and current waveforms automatically or upon demand. RAMLOCK LOCKING OUTLETS: A mechanical locking mechanism built to secure the broadest range of C14 and C20 plugs in place. ENVIRONMENTAL MONITORING: Support up to 12 daisy chained DX2-series SmartSensors, each with the ability to send SNMP-based alerts and email notifications. PER-INLET POWER SENSING: PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet. BRANCH CIRCUIT PROTECTION: This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic-hydraulic circuit breakers or UL 248 fuses. OUTLET CONTROL: On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles. ALTERNATING-PHASE OUTLETS: Evenly distributes multiple phases of power to each outlet for simplified load balancing, reduced cord lengths, and better airflow.

Overview

Server Technology's PRO4X Switched PDUs run on our state-of-the-art Xerus network interface platform and provide remote access to power, PDU status, input and branch current monitoring, and outlet on/off control. The PDU features RamLock, a self-locking mechanism to prevent accidental cord disconnects, and our award-winning HDOT Cx outlets that can be deployed as either a C13 or C19. Switched PDUs are secured with strong configurable password, active directory, 256-bit AES encryption, SSH, SSL and HTTPS support. SNMP traps provide automated alerts on power and environmental conditions from Legrand's plug-and-play environmental monitoring sensors like temperature, humidity, water, dry contact closure, airflow, air pressure differential, and more.

Management

HTTP/HTTPS TLSv1.2 SSHv2 Telnet SNMPv2c v3 (GET, SET, Traps) IPv4 IPv6 LDAPv3/LDAPS TACACS+ RADIUS FTP/SFTP RS-232

Certifications & Standards

Safety: Listed & Certified cTUVus mark UL 62368-1 CSA C22.2 No. 62368-1 EMC: FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A CAN ICES-003, Class A