HomeIndexesNVT PhybridgeNV-226J-PV

NVT Phybridge Video Transmitter and 12VDC CO Nverter

NVT Phybridge NV-226J-PV

Model NV-226J-PV

UPC Code: 735890012269

Provantage Code:  NVTE00K

Condition:  Factory New

  • Product Type: Video Extender Transmitter
  • Maximum Operating Distance: 3280.84 ft

Satisfaction Guaranteed

ElectronicsSecurity DevicesVideo Surveillance Systems

Specifications

NVT Phybridge NV-226J-PV Specifications

    Video Transmitter and 12VDC CO Nverter


Overview

    The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VAC-to-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

    The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and low- voltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.

    The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.

    Features:

    • Extended distance camera power and video routed through UTP and RJ45
    • Supports 12VDC cameras with onboard regulated power
    • Use with NVT's PVD™ Power Supply Hubs and Cable Integrators
    • Up to 3,000ft (1km) with a NVT DigitalEQTM Hub or active receiver, (see Power Distance Chart)
    • Up to 1,500ft (460m) with a NVT StubEQTM Hub
    • Frequency response DC to 10MHz (see Recommended Distance Chart)
    • Up to 750ft (225m) with NVT's Passive Receiver Hubs (see Power Distance Chart)
    • Exceptional interference rejection
    • Built-in transient protection
    • Limited lifetime warranty
    The NV-226J-PV Video Transmitter +12VDC Converter is a passive (non-amplified) video transmitter combined with a 24VACto-12VDC converter. Designed to fit on the back of a fixed 12 VDC camera, this unit is architected to convert 24VAC power from the control room, while delivering real-time baseband (composite) video at extended distances, all over one 4-pair UTP cable.

    The unparalleled interference rejection and low emissions of the NV-226J-PV allows video and lowvoltage power to coexist within the same 4-pair cable, using structured (EIA 568B) wiring practices. It is recommended that the 24VAC not share the same jacketed wire bundle with telecom or datacom signals.

    The NV-226J-PV carries a limited lifetime warranty, is UL and cUL listed, and is CE, WEEE, and RoHs compliant.


Specifications

Product NameVideo Transmitter and 12VDC CO Nverter
Product TypeVideo Extender Transmitter
Maximum Operating Distance3280.84 ft
Number of Network (RJ-45) Ports1
Connectivity TechnologyWired
Environmentally FriendlyYes
Network (RJ-45)Yes
Transmitter Height2.24"

2.25"

Transmitter Width1.54"

1.52"

Transmitter Depth0.79"

0.81"

Transmitter Weight (Approximate)1.76 oz
Product ModelNV-226J-PV
Limited WarrantyLifetime
Considering a Volume Purchase?

Shop with confidence! Provantage is an authorized NVT Phybridge dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

NVT Phybridge
 
© Copyright 1984-2024 Provantage
NVT Phybridge Model NV-226J-PV