NVT Phybridge Power Supply Intergrator Hub

NVT Phybridge NV-16PS10-PVD Specifications

Power Supply Intergrator Hub

At a Glance

Provides Class 2 SELV camera power and pass-through video and telemetry dataconnectivity for up to 16 cameras, each via a single RJ45 4-pair UTP cable Standard telecom/datacom structured cabling pinouts per EIA/TIA 568B Independently selectable 24 or 28VAC with 1 Amp max per channel Automatic-reset fault protection; transient protection Individually floating outputs ensure total ground-loop immunity Frequency response DC to 10MHz (see Recommended Distance Chart) Diagnostic LEDs show load/no load, miswires, and overload conditions Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera Power cameras via UTP over significant distances (see Power Distance Chart) 1 U high; 12" deep; wall, desk, or rack-mountable

Overview

The NVT Phybridge model NV-16PS10-PVD combines a 1 Amp/channel power supply with pass through video and telemetry data, for up to 16 cameras, all over UTP wire. Designed for installation in the wiring/IDF telecom closet, or at the Control/MDF room, the NV-16PS10-PVD consolidates connectivity via standard 4-pair RJ45 EIA/TIA 568B compliant premises wiring and pinouts. At the camera, Power, Video and Data connections are made using a PVD™ transceiver via an RJ45 connector and a single 4-pair cable. Control/MDF room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. Consolidated P/T/Z telemetry data, if required, passes through the NV-16PS10-PVD's data path, and is connected to the controller via another 4-pair RJ45 cable.

Certifications & Standards

See all products cUL CE

Package Contents

NV-16PS10-PVD Power over Ethernet Midspan Rack Mount "L" brackets (For front, rear, or wall installations) Rubber Feet (For desk applications) Power Cord (7ft)