HomeIndexesNVIDIAMCP7F00-A02AR30L

NVIDIA 2.5M Passive Copper Hybrid Cable Not GA Engineering Sample NCNR

NVIDIA MCP7F00-A02AR30L
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
QTY 10 Adapters with Support

QTY 2 Switches with Support

QTY 20 Cable

Transceivers alone do not qualify.


LinkX

Manufacturer Part#  MCP7F00-A02AR30L

Provantage Code:  MLNX2A6

Condition:  Factory New

  • Connector on Second End Details: 4 x SFP28 Network
  • Device Supported: Network Device
  • Cable Characteristic: Splitter Cable
  • Data Transfer Rate: 100 Gbit/s
  • American Wire Gauge: 30 AWG

Big DealsSatisfaction Guaranteed

CablesNetworking CablesNetworking Cables

Specifications

NVIDIA MCP7F00-A02AR30L Specifications

    2.5M Passive Copper Hybrid Cable Not GA Engineering Sample NCNR


At a Glance

    • 100GbE to 4x25GbE data rate
    • 40GbE to 4x10GbE data rate
    • SFF-8402 SFP28 compliant
    • SFF-8665 QSFP28 compliant
    • Operating case temperature 0-70°C
    • Single 3.3V supply voltage
    • Bit Error Rate (BER) better than 1E-15 with Mellanox systems
    • Hot pluggable
    • RoHS compliant
    • LSZH (Low Smoke Zero Halogen) jacket

Overview

    Mellanox® MCP7F00-A0xxRyyz DAC splitter cables are a high speed, cost-effective 100GbE to 4 x 25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

    MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.

    MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

    Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

    Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.

Features

    Passive

    Halogen Free

    Lead-free

    Bendable


Specifications

Product Name2.5M Passive Copper Hybrid Cable Not GA Engineering Sample NCNR
Manufacturer Part NumberMCP7F00-A02AR30L
Product TypeNetwork Cable
Cable CharacteristicSplitter Cable
Cable TypeQSFP28/SFP28
Connector Type on First EndQSFP28 Network
Connector Type on Second EndSFP28 Network
Cable Length2.50"
Environmentally FriendlyYes
American Wire Gauge30 AWG
Connector on First End Details1 x QSFP28 Network
Connector on Second End Details4 x SFP28 Network
Product MaterialCopper
Data Transfer Rate100 Gbit/s
Device SupportedNetwork Device
Product LineLinkX
Jacket TypeLSZH
Limited Warranty1 Year
WARNING: The plastic used in cable products can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following NVIDIA BIG DEAL qualifications:

QTY 10 Adapters with Support

QTY 2 Switches with Support

QTY 20 Cable

Transceivers alone do not qualify.


Shop with confidence! Provantage is an authorized NVIDIA dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

NVIDIA
 
© Copyright 1984-2024 Provantage
NVIDIA LinkX MCP7F00-A02AR30L