Modules on the same circuit shall interconnect using J series jumpers, which feature # 12 (20 amp) wire with genderless 30 amp connectors at both ends and require no hard wiring.
All modules on separate circuits shall connect using T series tails, which feature # 12 (20 amp) wire with genderless appliance-grade 30 amp connector on one end and wire tails for J-box connection on the other.
Two duplexes on M-2X modules can be fed by two separate circuits. Remove the factoryinstalled jumpers (line & neutral) and feed each duplex using two T series tails.
Isolated ground outlets shall not be mixed with non-isolated ground modules on the same circuit.
The modules shall be attached to MPR raceways using one or more screws (provided).
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.