8 fusedoutputs Power Supply/AC cess Power Controller 12/24VDC
Overview
AL600ACM220 converts a nominal 220VAC 50/60Hz input into eight (8) independently controlled 12VDC or 24VDC Fail-Safe and/or Fail-Secure outputs with a total of 6 amp continuous supply current. These power outputs can be converted to dry form "C" contacts. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc. This unit will route power to a variety of access control hardware devices including Mag Locks, Electric Strikes, Magnetic Door Holders, etc. The outputs will operate in both Fail-Safe and/or Fail-Secure modes. This unit is designed to be powered by one common power source (factory installed) which will provide power for both the board operation and locking devices, or two (2) totally independent power sources, one (1) providing power for board operation and the other for lock / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs.
8 fusedoutputs Power Supply/AC cess Power Controller 12/24VDC
Product Type
Proprietary Power Supply
Form Factor
Wall Mount
Product Model
AL600ACM220
Input Voltage
220 V AC
Output Voltage
12 V DC
24 V DC
Environmentally Friendly
Yes
Output Voltage Detail
12 V DC @ 6 A
24 V DC @ 6 A
Height
15.5"
Width
12.3"
Depth
4.5"
Output Current
6 A
Protection Type
Short Circuit
Thermal Overload
Limited Warranty
Lifetime
Input Voltage Type
AC
NDAA Compliant
Yes
Certifications & Standards
CE
Input Voltage Range
198 V AC - 256 V AC
Input Current
1.2 A @ 220V
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.