TS100 Metric Cable Fault Finder with BNC to Alligator Clips
Overview
The TS 100 Cable Fault Finder Tester work on virtually any two-or-more conductor cables. With the patented SmartTone analog tone generator that generates five different tones, identifying a specific pair is quick and easy, even in proximity to current-bearing cable. SmartTone capability identifies the exact pair by changing the tone at the far end of the cable when the correct pair is shorted.
AC voltage > 5 to 15 Volts RMS will trigger High Voltage Warning
Measurement Rate:
Maximum of 4 complete measurements/ second, decreasing to 2 seconds per measurement. Based on cable size and uniformity
Measurement technology:
Time Domain Reflectometry (TDR) with 50 ohm drive impedance, 6 V maximum pulse height
Tone Injection:
Approximately 1 kHz at an amplitude of 80% battery voltage. Variable frequency and cadence Tone changes when cable condition changes to "normal-open" from any other condition
TS100 Metric Cable Fault Finder with BNC to Alligator Clips
Manufacturer Part Number
26500610
Product Type
Cable Analyzer
Product Family
TS
Device Function
Short Circuit Testing
Battery Chemistry
Alkaline
Battery Size Supported
AA
Maximum Length Measurement
3000 ft
Country of Origin
Taiwan
Height
7.4"
Width
2.8"
Product Series
TS
Application / Usage
Network
WARNING: The plastic used in cable products can expose you to lead and lead compounds, chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.